________________________________________________________________________________

New Holland T1030 Specs

NH T1030 Engine Specifications

Advertised Engine Power, Rated, hp (kW) - 26 (19.4)
Maximum Engine Power, hp (kW) - Same as Advertised
Rated Engine Speed, rpm - 3000
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 7.1 (26.9)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Engine Make - Shibaura
Engine Model - S773L
Number of Cylinders - 3
Displacement, cu in (L) - 69 (1.13)
Engine Bore, in (mm) - 3.03 (77)
Engine Stroke, in (mm) - 3.19 (81)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Naturally aspirated
Fuel System Description - In-Line Pump System
Fuel System Control, Electronic or Mechanical - Mechanical
Fuel Injection to combustion chamber, Direct or Indirect - Indirect
Emission Level, US EPA Tier - np
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - No
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - No
Diesel Particulate Filter (DPF) - No
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 40

New Holland T1030 Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 19.7 (14.7)
PTO Speeds, rpm - 540
PTO operational Type (Independent; Live; Continuous) - Independent

Transmission

Manufacturer's Description - Hydrostatic
Transmission Type - 2 Range Hydrostatic
Number of Forward / Reverse Speeds - Infinite, 2 range
Maximum Speed Forward, mph (kph) - 10.3 (16.6)
Creeper Range Available - Yes, hydrostatic
Shuttle (Forward-Reverse) Available - Yes

NH T1030 Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Front Tire Size, 2WD - No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track - 18x8.5-8 4PR R4
Rear Tire Size or Track Width - 26x12.00-12 4PR R4
Wheelbase, 2WD, in (mm) - No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 55.1 (1400)

Axles and Brakes

Final Drive Location and Description - Spur / Inboard
Rear Axle Output End, Flange or Bar - Flange
Rear Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet disc

New Holland T1030 Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 5.6 (21.2)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 1

3-Point Hitch

3-Point Hitch Category - Category 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Position Control
Draft Link Ends Telescopic - No
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 700 (318)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Standard Lift Capacity at lift pin, lb (kg) - 1,580 (715)
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Fixed

New Holland T1030 Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) - No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 96.3 (2446)
Height to Top of Cab, in (mm) - No Cab
Height to Top of ROPS raised, in (mm) - 72.4 (1840)
Overall Width, with standard wheels or tracks, in (mm) - 46.4 (1180)
Weight, 2WD w/ROPS, lb (kg) - No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) - 1,455 (660)
Weight, 2WD w/Cab, lb (kg) - No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - No Cab