________________________________________________________________________________

New Holland TD5030 Specs

NH TD5030 Engine Specifications

Engine Model - New Holland F5C
Engine Power, Rated, hp (kW) - 75 (56)
Rated Engine Speed, rpm - 2500
Power Boost, hp (kW) - No boost
Fuel Tank, gal (L) - 23.8 (90.1) / 30.8 (116.6) w/Aux Tank
Cylinders - 4
Displacement, cu in (L) - 195 (3.2)
Engine Bore, in (mm) - 3.90 (99)
Engine Stroke, in (mm) - 4.095 (104)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged and Intercooled
Fuel System Description - Rotary-Distributor Type
Fuel System Control - Mechanical
Fuel Injection to combustion chamber - Direct
Emission Level - Tier 3
Exhaust Pipe - Vertical
Cooling System Fan Drive Type - Fixed
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120

New Holland TD5030 Transmission

Description - 12Fx12R w/ Synchronized Mech Shuttle
Transmission Type - 4 Synchronized Speeds in 3 Ranges
Forward / Reverse Speeds - 12F / 12R
Maximum Speed Forward, mph (kph) - 17.6 (28.3)
Creeper Range - Optional
Shuttle (Forward-Reverse) - Yes

NH TD5030 PTO

PTO Horsepower, hp (kW) - 62 (46.2)
PTO Speeds, rpm - 540
PTO Type - Independent

Wheels and Tires

Drive Wheels - 2WD / 4WD
Steering - Front Steer
Wheelbase, 2WD, in (mm) - 89.8 (2281)
Wheelbase, 4WD, in (mm) - 87.6 (2225)
Front Tire Size, 2WD - 10 x 16 - 8PR (F2)
Front Tire Size Width, 4WD - 12.4R24 (R1W)
Rear Tire Size Width - 18.4-30 6PR (R1)

New Holland TD5030 Axles and Brakes

Final Drive - Planetary / Inboard
Rear Axle Output End - Flange
Rear Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle - No
Brake Type - Wet disc

New Holland TD5030 Hydraulic System

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Gear
Standard Pump Flow, gpm (Lpm) - 16.1 (60.9)
Optional Pump Flow, gpm (Lpm) - No option
Standard Remote Valves - 1

3-Point Hitch

3-Point Hitch Category - Category 2
Optional Hitch Category - No option
Draft Sensing or Lift Control - Mechanical lower link
Draft Link Ends Adjustable - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 5,025 (2279)
Drawbar Description - Swinging

TD5030 Dimensions

2WD ROPS Weight - 6,393 lbs (2899 kg)
4WD ROPS Weight - 7,385 lbs (3349 kg)
2WD cab Weight - 7,010 lbs (3179 kg)
4WD cab Weight - 7,980 lbs (3619 kg)
2WD Front axle load - 5,511 lbs (2499 kg)
4WD Front axle load - 6,172 lbs (2799 kg)
Height (ROPS) - 107.7 inches (273 cm)
Height (cab) - 102.4 inches (260 cm)
Ground clearance - 16.6 inches (42 cm)

810TL Loader Specifications

Loader type - New Holland 810TL
Weight - 960 lbs (435 kg) / 1,115 lbs (505 kg) (MSL)
Height (to pin) - 125 inches (317 cm)
Clearance, dumped bucket - 87 inches (220 cm)
Dump reach - 43 inches (109 cm)
Dump angle - 67 / 65 (MSL)
Reach at ground - 86 inches (218 cm)
Rollback angle - 41
Breakout force (at 800mm) - 2,650 lbs (1202 kg) / 3,200 lbs (1451 kg) (MSL)
Lift to full height (at 800mm) - 2,100 lbs (952 kg) / 2,500 lbs (1134 kg) (MSL)
Lift to 1.5m (at 800mm) - 2,400 lbs (1088 kg) / 2,950 lbs (1338 kg) (MSL)

820TL Loader Specifications

Loader type - New Holland 820TL
Weight - 990 lbs (449 kg) / 1,150 lbs (521 kg) (MSL)
Height (to pin) - 136 inches (345 cm)
Clearance, dumped bucket - 98 inches (248 cm)
Dump reach - 36 inches (91 cm)
Dump angle - 58 / 57 (MSL)
Reach at ground - 88 inches (223 cm)
Rollback angle - 45
Breakout force (at 800mm) - 3,100 lbs (1406 kg) / 3,300 lbs (1496 kg) (MSL)
Lift to full height (at 800mm) - 2,500 lbs (1134 kg) / 2,650 lbs (1202 kg) (MSL)
Lift to 1.5m (at 800mm) - 2,850 lbs (1292 kg) / 3,100 lbs (1406 kg) (MSL)