________________________________________________________________________________

Case IH Puma 145 Tractor Specs

Puma 145 Engine Specification

Engine Model - Case IH FPT 6.7L
Engine Power, Rated, hp (kW) - 146 (107)
Maximum Engine Power, hp (kW) - 188 (138)
Engine Speed, rpm - 2200
Power Boost, hp (kW) - 42 (31)
Fuel Tank, gal (L) - 71 (269) + 16 (61) opt
Cylinders - 6
Displacement, cu in (L) - 411 (6.7)
Engine Bore, in (mm) - 4.095 (104)
Engine Stroke, in (mm) - 5.20 (132)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged / air-to-air aftercooled
Fuel System Description - High Pressure Common Rail
Fuel System Control - Electronic
Fuel Injection to combustion chamber - Direct
Emission Level - Tier 4A
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid - SCR with DEF
Exhaust Pipe - Vertical
Cooling System Fan Drive Type - Vistronic
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 150 Std / 200 Opt

Case IH Puma 145 Transmission

Description - 18 x 6 Full Powershift
Transmission Type - Full powershift
Forward / Reverse Speeds - 18F / 6R
Maximum Speed Forward, mph (kph) - 25 (40)
Creeper Range - Optional
Shuttle (Forward-Reverse) - Yes

Optional Transmission

Description - 19 x 6 Hi-Speed Gear, 25 mph (40kph)
Transmission Type - Full powershift
Forward / Reverse Speeds - 19F / 6R
Description - 19 x 6 Hi-Speed Gear, 30 mph (50kph)
Transmission Type - Full powershift
Forward / Reverse Speeds - 19F / 6R

PTO (Power take off)

PTO Horsepower, hp (kW) - 120 (89)
PTO Speeds, rpm - 540 / 1000
PTO operational Type - Independent

Wheels

Drive Wheels - 4WD
Tractor Steering Configuration - Front Steer
Wheelbase, 4WD, in (mm) - 107.6 (2734) / 109.8 (2789) Suspend Axle
Front Tire Size, 4WD - 14.9 R30, R1W
Rear Tire Size - 18.4 R42, R1W

Puma 145 Tractor Rear Axle

Final Drive - Planetary / Inboard
Axle Output End - Flange or bar
Axle Bar Diameter, in (mm) - 3.62 (92)
Suspended Front Axle - Optional
Brake Type - Wet disc

Hydraulic System

Hydraulic System Type - Closed Center, Pressure Flow Compensated
Main Hydraulic Pump Type - Variable Displacement
Standard Pump Flow, gpm (Lpm) - 26.5 (100)
Optional Pump Flow, gpm (Lpm) - No option
Standard Remote Valves - 2 std; 3 or 4 opt.

Hitch Features

3-Point Hitch Category - Category 2
Optional Hitch Category - Category 2 / 3N
Draft Sensing or Lift Control - Electronic Draft Control (EDC)
Draft Link Ends Adjustable - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 7,900 (3584)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 9,200 (4173)
Drawbar Description - Swinging