________________________________________________________________________________
Allied 2795 Front End Loader
Compatible Tractors
Tractor models .............. Ford, John Deere, Case IH, Massey Ferguson, New Holland
Power range, Hp (kW) .............. 75-130 (55-96)
Hydraulic system flow, gpm (lpm) .............. 15.0 (57.0)
Hydraulic pressure, bar (psi) .............. 172 (2500)
Loader
Loader model .............. Buhler Allied 2795
Leveling system .............. Non Self-Leveling / Mechanical Self-Leveling (TSL)
Mounting height (Nominal), in (mm) .............. 55 (1390)
Lift cylinder rod diameter, in (mm) .............. 1.50 (38)
Lift cylinder bore/stroke, in (mm) .............. 2.50/25.8 (63/650)
Lift cylinder length (Retracted), in (mm) .............. 38.0 (960)
Lift cylinder rod diameter (TSL), in (mm) .............. 1.75 (44)
Lift cylinder bore/stroke (TSL), in (mm) .............. 3.00/25.8 (76/650)
Lift cylinder length (TSL, Retracted), in (mm) .............. 38.0 (960)
Bucket cylinder rod diameter, in (mm) .............. 1.50 (38)
Bucket cylinder bore/stroke, in (mm) .............. 2.50/21.5 (63/545)
Bucket cylinder length (Retracted), in (mm) .............. 31.0 (785)
Bucket cylinder rod diameter (TSL), in (mm) .............. 1.75 (44)
Bucket cylinder bore/stroke (TSL), in (mm) .............. 3.00/16.8 (76/425)
Bucket cylinder length (TSL, Retracted), in (mm) .............. 46.3 (1170)
Weight with bucket, lb (kg) .............. 2800 (1270)
Standard Material Buckets
Width, in (mm) .............. 72 (1820)
Capacity (Struck), cu.ft (m3) .............. 22.5 (0.64)
Capacity (Heaped), cu.ft (m3) .............. 27.0 (0.77)
Weight, lbs (kg) .............. 340 (155)
Width, in (mm) .............. 84 (2125)
Capacity (Struck), cu.ft (m3) .............. 25.4 (0.73)
Capacity (Heaped), cu.ft (m3) .............. 30.5 (0.87)
Weight, lbs (kg) .............. 396 (180)
Width, in (mm) .............. 96 (2430)
Capacity (Struck), cu.ft (m3) .............. 31.1 (0.88)
Capacity (Heaped), cu.ft (m3) .............. 37.3 (1.06)
Weight, lbs (kg) .............. 451 (205)
Allied 2795 Loader Dimensions
Maximum lift height to pivot pin, in (mm) .............. 164 (4170)
Maximum lift height under level bucket, in (mm) .............. 154 (3910)
Clearance with bucket dumped, in (mm) .............. 130 (3300)
Reach at maximum lift height, in (mm) .............. 29 (740)
Maximum dump angle, degrees .............. 50
Maximum rollback angle, degrees .............. 34
Digging depth, in (mm) .............. 5 (127)
Overall height in carry position, in (mm) .............. 86 (2180)
Overall height in carry position (TSL), in (mm) .............. 87 (2210)
Operating Specifications (2795 Loader)
Lift capacity to maximum height, at pivot point, lbs (kg) .............. 3685 (1671)
Lift capacity to maximum height, 31.5" (0.8 m) forward of pivot point, lbs (kg) .............. 2610 (1184)
Lift capacity to 59" (1.5 m) height, at pivot point, lbs (kg) .............. 5010 (2272)
Lift capacity to 59" (1.5 m) height, 31.5" (0.8 m) forward of pivot point, lbs (kg) .............. 3915 (1776)
Breakout force, at pivot point, lbs (kg) .............. 6440 (2864)
Breakout force, 31.5" (0.8 m) forward of pivot point, lbs (kg) .............. 4780 (2126)
Bucket rollback force at maximum height, lbs (kg) .............. 4245 (1888)
Bucket rollback force at 59" (1.5 m) lift height, lbs (kg) .............. 6480 (2882)
Bucket rollback force at ground level, lbs (kg) .............. 6385 (2840)
Operating Specifications (2795 TSL Loader)
Lift capacity to maximum height, at pivot point, lbs (kg) .............. 3680 (1669)
Lift capacity to maximum height, 31.5" (0.8 m) forward of pivot point, lbs (kg) .............. 2605 (1182)
Lift capacity to 59" (1.5 m) height, at pivot point, lbs (kg) .............. 5020 (2277)
Lift capacity to 59" (1.5 m) height, 31.5" (0.8 m) forward of pivot point, lbs (kg) .............. 3920 (1778)
Breakout force, at pivot point, lbs (kg) .............. 6460 (2873)
Breakout force, 31.5" (0.8 m) forward of pivot point, lbs (kg) .............. 4795 (2133)
Bucket rollback force at maximum height, lbs (kg) .............. 4335 (1928)
Bucket rollback force at 59" (1.5 m) lift height, lbs (kg) .............. 6360 (2829)
Bucket rollback force at ground level, lbs (kg) .............. 6065 (2698)
Cycle Times
Raising Time (STD/TSL), sec .............. 4.4/6.3
Lowering Time (STD/TSL), sec .............. 2.8/4.2
Bucket Dumping Time (STD/TSL), sec .............. 3.7/4.1
Bucket Rollback Time (STD/TSL), sec .............. 2.3/2.7
________________________________________________________________________________
________________________________________________________________________________________
BUSH HOG FRONT END LOADERS SPECS | ||||
1045 | 2045 | 3045 | 3545 | 4045 |
5045 | 6045 | 1846 QT | 2246 QT | 2346 QT |
2400 QT | 2426 QT | 2446 QT | 2447 QT | 2846 QT |
3226 QT | 3227 QT | 3860 QT | M146 | M246 |
M300 | M346 | M446 | M546 | M646 |
________________________________________________________________________________________
________________________________________________________________________________________
ALO QUICKE FRONT END LOADERS SPECS | ||||
Q20 | Q25 | Q26 | Q30 | Q35 |
Q36 | Q38 | Q40 | Q45 | Q46 |
Q48 | Q50 | Q55 | Q56 | Q58 |
Q60 | Q65 | Q66 | Q68 | Q75 |
Q76 | Q78 | Q88 | Q720 | Q730 |
Q740 | Q750 | Q755 | Q760 | Q770 |
Q940 | Q950 | Q960 | Q970 | Q980 |
Q3 | Q4 | Q4L | Q4S | Q5 |
Q5L | Q5M | Q5S | Q6M | Q7M |
Q8M | Q31 | Q41 | Q51 | Q61 |
Q98 | X2 | X3 | X3S | X4 |
X4S | X5S | X21 | X26 | X31 |
X36 | X41 | X46 | X51 | X56 |
________________________________________________________________________________________
KOYKER FRONT END LOADERS SPECIFICATIONS | ||||
50 | 80 | 110 | 120 | 125 |
140 | 145 | 150 | 155 | 160 |
165 | 175 | 180 | 185 | 210 |
220 | 245 | 310 | 315 | 345 |
385 | 400 | 445 | 500 | 510 |
542 | 545 | 565 | 585 | 600 |
640 | 645 | 740 | 780 | 785 |
1545 PRO | 1585 PRO | 2585 PRO | 2785 PRO | K1 |
K2 | K3 | K4 | K5 | K6 |
________________________________________________________________________________________
BUHLER ALLIED FRONT END LOADERS SPECS | ||||
95 | 195 | 295 | 395 | 495 |
595 | 695 | 795 | 895 | 995 |
2495 | 2595 | 2795 | 2895 | 3995 |
________________________________________________________________________________________
STOLL FRONT END LOADERS SPECIFICATIONS | ||||
CL 655 | CL 755 | CL755P | CL 855 | CL 955 |
FC 250 | FC 350 | FC350P | FC 450 | FC450P |
FS 8 | FS 10 | FS 20 | FZ 8 | FZ 10 |
FS 30 | FZ 20.1 | FZ 20 | FZ 30.1 | FZ 30 |
FZ 40.1 | FZ 40 | FZ 45.1 | FZ 50.1 | FZ 50 |
FZ 60.1 | FZ 60 | FZ 80.1 | FZ 80 | FZ 100 |
Robust F4 | Robust F5 | F8 HDPM | F10 HDP | F10 HDPM |
F15 HDPM | Robust F15 | F30 HDPM | Robust F30 | Robust F50 |
________________________________________________________________________________________
NEW HOLLAND FRONT END LOADERS SPECS | ||||
10LA | 12LA | 14LA | 15LA | 16LA |
17LA | 18LA | 7308 | 100LC | 110TL |
140TL | 200LC | 210TL | 240TL | 235TL |
250TL | 250TLA | 260TL | 270TL | 810TL |
820TL | 830TL | 840TL | 850TL | 860TL |
870TL | 810LA | 815LA | 830LA | 850LA |
855LA | 82LB | 84LB | 655TL | 665TL |
615TL | 621TL | 625TL | 630TL | 635TL |
640TL | 645TL | 815TL | 825TL | 835TL |
845TL | 855TL | 865TL | 875TL | 885TL |
330TL | 340TL | 350TL | 360TL | 510TL |
520TL | 530TL | 540TL | 611TL | 720TL |
730TL | 740TL | 750TL | 760TL | 770TL |
780TL | 790TL | 835LA | 857LA | 910LA |
915LA | 917LA | 935LA | 937LA | 975LA |
________________________________________________________________________________________
CASE IH FRONT END LOADERS SPECS | ||||
L103 | L104 | L105 | L106 | L107 |
L108 | L130 | L160 | L300 | L340 |
L350 | L360 | L530 | L540 | L545 |
L550 | L555 | L560 | L565 | L570 |
L575 | L720 | L730 | L735 | L740 |
L745 | L750 | L755 | L760 | L765 |
L770 | L775 | L780 | L785 | L795 |
90 | 890 | 2200 | 2250 | LX156 |