________________________________________________________________________________

Kubota M126GX Tractor Specs

M126GX Engine Specifications

Engine Model - Kubota V6108-TI-CRS
Number of Cylinders - 4
Displacement, cu in (L) - 374 (6.124)
Engine Bore, in (mm) - 4.65 (118)
V6108 Engine Stroke, in (mm) - 5.51 (140)
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Wastegate Turbocharger with Intercooler
Advertised Engine Power, Rated, hp (kW) - 125 (93.2)
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 2200
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 52.8 (200)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber - Direct
Kubota V6108 Emission Level, US EPA Tier - Tier 4 Interim
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - EGR
Diesel Particulate Filter (DPF) - DPF standard
Exhaust Pipe, Vertical stack or Horizontal - Vertical
Cooling System Fan Drive Type - Viscous
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 80

PTO

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 108 (80.5)
Power Take Off Speeds, rpm - 540 / 1000 (two shafts)
PTO operational Type - Live-independent

Kubota M126 GX Basic Transmission

Manufacturer's Description - Intelli-Shift, 24F/24R
Transmission Type - 8-speed powershift, 3 mech. ranges
Number of Forward / Reverse Speeds - 24F / 24R
Maximum Speed Forward, mph (kph) - 24.3 (39.1)
Creeper Range Available - Optional
Shuttle (Forward-Reverse) Available - Standard

Optional Transmission

Manufacturer's Description - Intelli-Shift, 32F/32R w/creeper
Transmission Type - 8-speed powershift, 4 mech. ranges
Number of Forward / Reverse Speeds - 32F / 32R

Wheel Configuration

Drive Wheels - 4WD
Steering Configuration - Front Steer

Rear and Front Axles

Final Drive Location and Description - Inboard planetary
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet disc

Kubota M126GX Hydraulic System

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Gear
Standard Pump Flow, gpm (Lpm) - 20.4 (77.2)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 2

3-Point Hitch and Drawbar

3-Point Hitch Category - Category 2
Optional Hitch Category - No option
Draft Sensing or Lift Control - Draft control, lower link sensing
Draft Link Ends Adjustable - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 6,834 (3100)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 9,447 (4285)
Drawbar Description - Swinging, extendable

Kubota M126 GX Wheelbase and Tires

Wheelbase, MFD/4WD or Track, in (mm) - 105.9 (2690)
Front Tire Size orTrack Width, MFD/4WD or Track - 14.9 R24
Rear Tire Size or Track Width - 18.4 R38

Dimensions and Weight

Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 171.7 (4360)
Height to Top of Cab, in (mm) - 113.2 (2875)
Overall Width, with standard wheels or tracks, in(Mm) - 85.8 (2180)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 10,373 (4705)
Weight, Total allowable, w/maximum ballast, lb (kg) - 12,573 (5703)