________________________________________________________________________________

Kubota MX4800 Specs

Kubota V2403 Engine Specifications

Engine Model - Kubota V2403-CR
Number of Cylinders - 4
Displacement, cu in (L) - 148.5 (2.434)
Engine Bore, in (mm) - 3.425 (87)
Engine Stroke, in (mm) - 4.032 (102.4)
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Natural
Fuel System Description - Common Rail System
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 4 Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - EGR standard
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - DPF standard
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Advertised Engine Power, Rated, hp (kW) - 49.3 (36.8)
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 2700
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 13.5 (51)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 45

Kubota MX4800 Power Take-off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 40.5 / 39 (30.2 / 29.1)
PTO Speeds, rpm - 540
PTO operational Type (Independent; Live; Continuous) - Live-independent

Basic Transmission Configuration

Manufacturer's Description - Synchro-Shuttle
Transmission Type - Partially synchronized, 3rd & 4th
Number of Forward / Reverse Speeds - 8F/ 8R
Maximum Speed Forward, mph (kph) - 16 (25.9)
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Standard

Optional Transmission

Manufacturer's Description - HST Hydrostatic
Transmission Type - Hydrostatic, 3 ranges
Number of Forward / Reverse Speeds - Infinite, 3 ranges

Wheel or Track Configuration

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 2WD / 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer

Rear Axle Assembly

Final Drive Location and Description - Spur gear
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle

Kubota MX4800 Front Axle and Brakes

Suspended Front Axle Available - No
Service Brake Type - Wet disc

Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Tandem gear-type
Implement Pump Flow, gpm (Lpm) - 9.5 (35.8)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 1, 2, or 3 optional

Kubota MX4800 3-Point Hitch

3-Point Hitch Category - Category 2 / 1
Optional Hitch Category - Convertible to Category 1
Draft Sensing or Lift Control - Position std; Draft opt.
Draft Link Ends Telescopic - Optional
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 2,310 (1050)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Standard Lift Capacity at lift pin, lb (kg) - np
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Extendable

Wheelbase

Wheelbase, 2WD, in (mm) - 74.6 (1895)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 74.6 (1895)

Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) - 127.8 (3245)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 126.2 (3205)
Height to Top of Cab, in (mm) - No cab
Height to Top of ROPS raised, in (mm) - 95.7 (2430)
Overall Width, with standard wheels or tracks, in (mm) - 69.7 (1770)
Weight, 2WD w/ROPS, lb (kg) - 3,469 (1574)
Weight, MFD/4WD w/ROPS, lb (kg) - 3,712 (1684) std; 3,729 (1692) HST
Weight, 2WD w/Cab, lb (kg) - No cab
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - No cab
Weight, Total allowable, w/maximum ballast, lb (kg) - np

Tire Size

Front Tire Size, 2WD - 7.5L-15, R1
Front Tire Size orTrack Width, MFD/4WD or Track - 9.5-16, R1
Rear Tire Size or Track Width - 14.9-26, R1