________________________________________________________________________________
Massey Ferguson 7495 Specs
Engine Specifications
Engine Model - Agco Sisu Power 66 CTA
Engine Power, Rated, hp (kW) - 185 (138)
Maximum Engine Power, hp (kW) - 203 (151)
Engine Speed, rpm - 2200
Power Boost, hp (kW) - 18 (13.4)
Fuel Tank, gal (L) - 94 (355)
Cylinders - 6
Displacement, cu in (L) - 403 (6.6)
Engine Bore, in (mm) - 4.25 (108)
Engine Stroke, in (mm) - 4.73 (120)
Block Design, Replaceable Liners - Replaceable wet liners
Aspiration, Turbocharged or Naturally Aspirated - Turbo air to air
aftercooled
MF 7495 Fuel System
Fuel System Type - High Pressure Common Rail
Fuel System Control - Electronic
Fuel Injection to combustion chamber - Direct
Emission and Exhaust Treatment -
Emission Level - Tier 3
Exhaust Gas Recirculation - Internal EGR
Exhaust Pipe - Vertical
Cooling and Electrical System
Fan Drive Type - Belt
Electrical System -
System Rating, Volts - 12
Alternator Rating, Amps - 120 Std / 150 Opt
Massey Ferguson 7495 Transmission
Description - Dyna-VT
Transmission Type - Continuously Variable Transmission
Forward / Reverse Speeds - Infinite 2F / 2R
Maximum Speed Forward, mph (kph) - 25 (40)
Creeper Range - Yes, CVT
Shuttle (Forward-Reverse) - Yes
PTO
PTO Horsepower, hp (kW) - 155 (115.6)
PTO Speeds, rpm - 540 / 1000 / 540E
PTO Type - Independent
MF 7495 Wheels and Tires
Drive Wheels - 4WD
Steering - Front Steer
Wheelbase 4WD, in (mm) - 118 (2996)
Front Tire Size Width, 4WD - 16.9 R28
Rear Tire Size Width - 18.4 R42
Massey Ferguson 7495 Axles and Brakes
Final Drive - Planetary / Inboard
Rear Axle Output End - Bar
Rear Axle Bar Diameter, in (mm) - 3.74 (95)
Suspended Front Axle Available - Std w/50Kph Trans
Brake Type - Wet Disc
MF 7495 Hydraulic System
Hydraulic System Type - Closed Center PFC
Main Hydraulic Pump Type - Gear Pump
Standard Pump Flow, gpm (Lpm) - 29 (110)
Optional Pump Flow, gpm (Lpm) - 39 (150)
Standard Remote Valves - 3
3-Point Hitch Features
3-Point Hitch - Category 3
Optional Hitch - Category 3N
Draft Sensing or Lift Control - Lower Link
Draft Link Ends Adjustable - Yes
3-Point Hitch Lift Capacity
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 16,140 (7320)
Standard Lift Capacity at lift pin, lb (kg) - 20,503 (9300)
Drawbar Description - Swinging
________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________