________________________________________________________________________________
New Holland T6010 Technical Data
NH T6010 Engine Specifications
Engine Model - New Holland NEF
Engine Type - 4 stroke 8-valve direct injection
Number of Cylinders - 4
Displacement, cu in (L) - 274 (4,49)
Engine Bore, in (mm) - 4,10 (104,0)
Engine Stroke, in (mm) - 5,20 (132,0)
Aspiration - Turbocharged
Engine cooled - Water cooled
Rated Engine Power, hp (kW) - 99,3 (74,0)
Maximum Engine Power, hp (kW) - 99,3 (74,0)
Rated Engine Speed, rpm - 2200
Maximum Torque, Nm (ft-lbs) - 400 (296)
Torque Speed, rpm - 1400
Torque rise, % - 24
Emission level - Tier 2
Fuel System - Mechanical fuel injection
Fuel Tank Capacity, gal (L) - 46,5 (176,0)
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120
New Holland T6010 Power Take-Off
PTO Operational Type - Electro-hydraulic
PTO Horsepower, hp (kW) - 80,1 (59,7)
PTO Speeds, rpm - 540/540E/1000
Engine Speeds, rpm - 1969/1546/2120
Front PTO - Optional
Front PTO Speeds, rpm - 1000
New Holland T6010 Transmission
Standard Transmission - Synchro Command 12F/12R (24F/24R with creeper)
Number of Forward Speeds - 12 (24)
Number of Reverse Speeds - 12 (24)
Maximum Speed Forward, mph (kph) - 24,85 (40,00)
Optional Transmission - Dual Command, 24F/24R (48F/48R with creeper)
Number of Forward Speeds - 24 (48)
Number of Reverse Speeds - 24 (48)
Maximum Speed Forward, mph (kph) - 24,9 (40,0)
NH T6010 Wheels and Tires
Drive Wheels - 4x4 4WD
Steering Configuration - Front Steer
Steering System - Hydrostatic power
Front Tire Size - 13.6 R28
Rear Tire Size - 16.9 R38
Axles and Brakes
Differential Lock - Standard
Final Drive - Epicyclic
Service Brake - Hydraulic wet disc
NH T6010 Hydraulics and Hitch
Hydraulic System Type (Std) - Fixed displacement
Hydraulic System Type (Opt) - Close center load sensing (CCLS)
Hydraulic Pressure (Std), Bar (psi) - 190 (2756)
Hydraulic Pressure (CCLS), Bar (psi) - 210 (3050)
Implement Pump Flow (Std), gpm (Lpm) - 21,1 (80,0)
Implement Pump Flow (CCLS), gpm (Lpm) - 29,7 (113,0)
Number of Standard Remote Valves - 3/4
3-Point Hitch Category - 2
Draft Control - Mechanical draft control (MDC)
Standard Lift Capacity 600mm behind pin, lb (kg) - 8150 (3700)
Standard Lift Capacity at lift pin, lb (kg) - 13930 (6330)
New Holland T6010 Dimensions and Weight
Wheelbase (4WD), in (mm) - 95,0 (2410)
Wheelbase (SuperSteer), in (mm) - 95,3 (2420)
Wheelbase (Terraglide), in (mm) - 99,2 (2510)
Length, in (mm) - 169,0 (4290)
Height, in (mm) - 107,3 (2720)
Overall Width, in (mm) - 73,7 (1870)
Ground Clearance, in (mm) - 16,8 (420)
Turning Radius (4WD), in (mm)
Turning Radius (SuperSteer), in (mm)
Weight (4WD), lb (kg) - 10450 (4740)
Weight (SuperSteer), lb (kg) - 11070 (5020)
Weight (Terraglide), lb (kg) - 11110 (5040)
________________________________________________________________________________
________________________________________________________________________________________
NH TRACTORS SPECIFICATIONS | ||||
T2220 | T2420 | T4.115 | T4.80 | T4050 |
T5.110 | T5060 | T6.140 | T6050 | T7.185 |
T7.270 | T7050 | T8.350 | TD4040 | TD5050 |
TL90 | TS110 | TS6030 | TT75 | TV6070 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
NH TRACTORS TROUBLESHOOTING | ||||
6640 | G240 | L95 | M135 | T3040 |
T4.110 | T5.105 | T5070 | T6.180 | T6030 |
T7.270 | T7040 | TC29D | TC35 | TD5.85 |
TL100 | TS6.140 | TV140 | TM155 | TN65 |
________________________________________________________________________________________
FORD TRACTORS SPECIFICATIONS | ||||
TL100 | TS6.140 | TV140 | TM155 | TN65 |
640 | 850 | 950 | 1100 | 1210 |
1320 | 1520 | 1620 | 1710 | 1900 |
1910 | 2000 | 2810 | 3000 | 3600 |
3910 | 3930 | 4000 | 4600 | 4610 |
4630 | 5000 | 5030 | 5600 | 5610 |
5640 | 6600 | 6610 | 6640 | 7630 |
7740 | 7840 | 8240 | 8340 | 8770 |
TW-15 | TW-20 | TW-25 | TW-30 | TW-35 |