________________________________________________________________________________

New Holland TC40D Technical Specifications

New Holland TC40D Engine Specs

Engine Model - Shibaura N844
Engine Type - 4-Stroke, liquid-cooled diesel
Number of Cylinders - 4
Displacement, cu in (L) - 121,7 (2,0)
Engine Bore, in (mm) - 3,31 (84,0)
Engine Stroke, in (mm) - 3,54 (90,0)
Rated Engine Power, hp (kW) - 40,0 (29,8)
Rated Engine Speed, rpm - 2600
Low Idle Speed, rpm - 1025
Compression Ratio - 22.5:1
Firing Order - 1-3-4-2
Fuel Tank Capacity, gal (L) - 13,0 (54,5)
Oil Capacity, qts (L) - 6,3 (6,0)
Coolant Capacity, qts (L) - 8,3 (7,9)
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 40
Battery Type - Negative ground, 600 cca

Power Take-Off

PTO Operational Type - Independent
PTO Horsepower, hp (kW) - 35,0 (26,1)
Rear PTO / Engine Speeds, rpm - 540/2400
Mid PTO / Engine Speeds, rpm - 2000/2420

New Holland TC40D Transmission

Transmission Model - Dual Power
Transmission Type - Hydrostatic (HST)
Gears - 4-Range forward and reverse
Maximum Speed Forward, mph (kph) - 13,6 (21,9)
Service Brake - Wet Disc

New Holland TC40D Wheels and Tires

Drive Wheels - 2WD/4WD
Steering Configuration - Front Steer
Steering System - Power
Front Tire Size (2WD) - 25x8.50-14
Rear Tire Size (2WD) - 44x18-20
Front Tire Size (4WD) - 27x8.50-15
Rear Tire Size (4WD) - 22.5LLx16.1

New Holland TC40D Hydraulic System and Hitch

Hydraulic System Type - Open Center
Implement Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 9,8 (37,1)
Steering Pump Flow, gpm (Lpm) - 5,3 (19,4)
Hydraulic Pressure, Bar (psi) - 160 (2275)
Number of Standard Remote Valves (Rear/Mid) - 3/2
3-Point Hitch Category - 1
Draft Sensing or Lift Control - Hydraulic Position Control and Top Link Sensing
Standard Lift Capacity 24-in (600 mm) behind pin, lb (kg) - 2330 (1060)
Drop Rate Control - Standard

New Holland TC40D Dimensions and Weight

Wheelbase (FWD), in (mm) - 73,6 (1870)
Wheelbase (SuperSteer), in (mm) - 81,0 (2060)
Length, in (mm) - 129,5 (3280)
Height, in (mm) - 95,5 (2420)
Overall Width, in (mm) - 72,7 (1850)
Ground Clearance (FWD), in (mm) - 14 (356)
Ground Clearance (SuperSteer), in (mm) - 11 (279)
Turning Radius (FWD), in (mm) - 127,5 (3240)
Turning Radius (SuperSteer), in (mm) - 113 (2870)
Weight (FWD), lb (kg) - 2870 (1305)
Weight (SuperSteer), lb (kg) - 3050 (1385)

• see other models
  

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________