________________________________________________________________________________

New Holland TC45D Specifications

New Holland TC45D Engine Technical Data

Engine Model - Shibaura N844L
Engine Type - 4-Stroke, liquid-cooled diesel
Number of Cylinders - 4
Displacement, cu in (L) - 135,2 (2,2)
Engine Bore, in (mm) - 3,31 (84,0)
Engine Stroke, in (mm) - 3,94 (100,0)
Rated Engine Power, hp (kW) - 45,0 (33,6)
Rated Engine Speed, rpm - 2600
Low Idle Speed, rpm - 1025
Compression Ratio - 22.5:1
Firing Order - 1-3-4-2
Fuel Pump Type - In-Line
Cooling System Type - Pressurized Liquid with Recirculating Bypass
Water Pump Type - Centrifugal
Drive Belt - V-Belt
Fuel Tank Capacity, gal (L) - 13,0 (54,5)
Oil Capacity, qts (L) - 6,3 (6,0)
Coolant Capacity, qts (L) - 8,4 (8,0)
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 40
Battery Type - Negative ground, 600 cca

New Holland TC45D Power Take-Off

PTO Operational Type - Independent
PTO Horsepower, hp (kW) - 27,7 (20,8)
Rear PTO / Engine Speeds, rpm - 540/2400
Rear PTO Shaft, in (mm) - 1,38 (35,0)
Mid PTO / Engine Speeds, rpm - 2000/2420
Mid PTO Shaft, in (mm) - 1,0 (25,3)

Transmission Configuration

Transmission Model - Dual Power
Transmission Type - Hydrostatic (HST)
Gears - 4-Range forward and reverse
Maximum Speed Forward, mph (kph) - 13,6 (21,9)
Service Brake - Wet Disc

New Holland TC45D Wheels and Tires

Drive Wheels - 2WD/4WD
Steering Configuration - Front Steer
Steering System - Power
Front Tire Size (2WD) - 25x8.50-14
Rear Tire Size (2WD) - 44x18-20
Front Tire Size (4WD) - 27x8.50-15
Rear Tire Size (4WD) - 22.5LLx16.1

New Holland TC45D Hydraulic System and Hitch

Hydraulic System Type - Open Center
Implement Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 9,8 (37,1)
Steering Pump Flow, gpm (Lpm) - 5,3 (19,4)
Hydraulic Pressure, Bar (psi) - 160 (2275)
Number of Standard Remote Valves (Rear/Mid) - 3/2
3-Point Hitch Category - 1
Draft Sensing or Lift Control - Hydraulic Position Control and Top Link Sensing
Standard Lift Capacity 24-in (600 mm) behind pin, lb (kg) - 2330 (1060)
Drop Rate Control - Standard

New Holland TC45D Dimensions and Weight

Wheelbase (FWD), in (mm) - 73,6 (1870)
Wheelbase (SuperSteer), in (mm) - 81,0 (2060)
Length (FWD), in (mm) - 125,2 (3181)
Length (SuperSteer), in (mm) - 129,6 (3290)
Height, in (mm) - 95,5 (2430)
Overall Width, in (mm) - 84,5 (2146)
Ground Clearance (FWD), in (mm) - 14 (356)
Ground Clearance (SuperSteer), in (mm) - 11,5 (292)
Turning Radius (FWD), in (mm) - 127,5 (3240)
Turning Radius (SuperSteer), in (mm) - 113 (2870)
Weight (FWD), lb (kg) - 3420 (1550)
Weight (SuperSteer), lb (kg) - 3590 (1630)

• see other models
  

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________