________________________________________________________________________________
New Holland TC45DA Technical Data
New Holland TC45DA Engine Specifications
Engine Model - Shibaura N844L
Engine Type - 4-Stroke, liquid-cooled diesel
Number of Cylinders - 4
Displacement, cu in (L) - 135,2 (2,2)
Engine Bore, in (mm) - 3,31 (84,0)
Engine Stroke, in (mm) - 3,94 (100,0)
Rated Engine Power, hp (kW) - 45,0 (33,6)
Rated Engine Speed, rpm - 2600
Low Idle Speed, rpm - 1025
Compression Ratio - 22.5:1
Firing Order - 1-3-4-2
Fuel Pump Type - In-Line
Cooling System Type - Pressurized Liquid with Recirculating Bypass
Water Pump Type - Centrifugal
Drive Belt - V-Belt
Fuel Tank Capacity, gal (L) - 13,0 (54,5)
Oil Capacity, qts (L) - 6,3 (6,0)
Coolant Capacity, qts (L) - 8,4 (8,0)
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 40
Battery Type - Negative ground, 600 cca
New Holland TC45DA Power Take-Off
PTO Operational Type - Independent
PTO Horsepower, hp (kW) - 27,7 (20,8)
Rear PTO / Engine Speeds, rpm - 540/2400
Rear PTO Shaft, in (mm) - 1,38 (35,0)
Mid PTO / Engine Speeds, rpm - 2000/2420
Mid PTO Shaft, in (mm) - 1,0 (25,3)
Transmission Configuration
Transmission Type - Hydrostatic
Number of Motor Speeds - 2
Number of Transmission Ranges - 2
Motor Displacement (Hi/Lo), cu in (L) - 1,34 (0,02) / 2,27 (0,04)
Motor Speed Shift - Electric Switch
Maximum Speed Forward, mph (kph) - 13,6 (21,9)
New Holland TC45DA Wheels and Tires
Drive Wheels - 4WD 4x4
Steering Configuration - Front Steer
Steering System - Power
Front Tire Size - 10x16.5, 6PR, R4
Rear Tire Size - 17.5x24, 8PR, R4
Axles and Brakes
Front Axle Differential Capacity, qts (L) - 5,6 (5,3)
Front to Rear Axle Ratio - 1.660 to 1
Service Brake - Wet Disc
Brake Disc Diameter, in (mm) - 6,9x5,6 (175x143)
New Holland TC45DA Hydraulic System
Hydraulic System Type - Open Center
Implement Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 9,8 (37,1)
Steering Pump Flow, gpm (Lpm) - 5,3 (19,4)
Hydraulic Pressure, Bar (psi) - 160 (2275)
Number of Standard Remote Valves (Rear/Mid) - 3/2
3-Point Hitch
3-Point Hitch Category - 1
Draft Sensing or Lift Control - Hydraulic Position Control and Top Link
Sensing
Standard Lift Capacity 24-in (600mm) behind pin, lb (kg) - 2330 (1060)
Drop Rate Control - Standard
New Holland TC45DA Dimensions and Weight
Wheelbase (FWD), in (mm) - 73,6 (1870)
Wheelbase (SuperSteer), in (mm) - 81,0 (2060)
Length, in (mm) - 120.2 (3053)
Height, in (mm) - 94.5 (2400)
Overall Width, in (mm) - 84,5 (2146)
Ground Clearance (FWD), in (mm) - 14 (356)
Ground Clearance (SuperSteer), in (mm) - 11,5 (292)
Turning Radius (FWD), in (mm) - 127,5 (3240)
Turning Radius (SuperSteer), in (mm) - 113 (2870)
Weight (FWD), lb (kg) - 2950 (1340)
Weight (SuperSteer), lb (kg) - 3120 (1415)
________________________________________________________________________________
________________________________________________________________________________________
NH TRACTORS SPECIFICATIONS | ||||
T2220 | T2420 | T4.115 | T4.80 | T4050 |
T5.110 | T5060 | T6.140 | T6050 | T7.185 |
T7.270 | T7050 | T8.350 | TD4040 | TD5050 |
TL90 | TS110 | TS6030 | TT75 | TV6070 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
NH TRACTORS TROUBLESHOOTING | ||||
6640 | G240 | L95 | M135 | T3040 |
T4.110 | T5.105 | T5070 | T6.180 | T6030 |
T7.270 | T7040 | TC29D | TC35 | TD5.85 |
TL100 | TS6.140 | TV140 | TM155 | TN65 |
________________________________________________________________________________________
FORD TRACTORS SPECIFICATIONS | ||||
TL100 | TS6.140 | TV140 | TM155 | TN65 |
640 | 850 | 950 | 1100 | 1210 |
1320 | 1520 | 1620 | 1710 | 1900 |
1910 | 2000 | 2810 | 3000 | 3600 |
3910 | 3930 | 4000 | 4600 | 4610 |
4630 | 5000 | 5030 | 5600 | 5610 |
5640 | 6600 | 6610 | 6640 | 7630 |
7740 | 7840 | 8240 | 8340 | 8770 |
TW-15 | TW-20 | TW-25 | TW-30 | TW-35 |