________________________________________________________________________________

New Holland TM 130 Tractor Technical Data

NH TM 130 Engine Specs

Engine Model - New Holland 675TA-HD
Engine Type - Six-cylinder diesel, turbocharged with intercooler
Displacement - 7,485 cm3 (457 ci3)
Cylinders - 6
Aspiration - Turbocharged with intercooler
Engine horsepower - 96 kw (131 hp)
Rated engine speed - 2200 rpm
Maximum torque - 559 Nm
Rated torque speed - 1400 rpm
Torque rise - 34 %
Bore and stroke - 111,8x127,0 mm (4,40x5,00 in)
Compression ratio - 17.0:1
Air cleaner - Dual paper elements with aspirator
Oil filter - 1 full flow cartridge
Fuel filter - 1 paper element
Fuel tank capacity - 285,0 L (75,3 gal)
Oil capacity - 18,9 L (20,0 qts)
Coolant capacity - 25,4 L (26,8 qts)
Electrical system - 12V
Electrical Ground - Negative
Charging system - Alternator
Alternator - 120 Amps
Battery Number - One
Battery cold-cranking - 1300 Amps

New Holland TM130 Transmission

Standard Transmission - 18F/6R (31F/12R with creeper)
Transmission Type - Range Command Semi PowerShift
Forward Gears - 18 (31)
Reverse Gears - 6 (12)
Travel Speed (Low) - 2,46 kph (1,52 mph)
Travel Speed (High) - 40,0 kph (25,2 mph)
Optional Transmission - 24F/12R (48F/24R with creeper)
Transmission Type - Dual Command
Forward Gears - 24 (48)
Reverse Gears - 12 (24)
Travel Speed (Low) - 1,80 kph (1,12 mph)
Travel Speed (High) - 40,0 kph (25,2 mph)
Optional Transmission - 20F/16R (40F/32R with creeper)
Transmission Type - Shuttle Command
Forward Gears - 20 (40)
Reverse Gears - 16 (32)
Travel Speed (Low) - 1,40 kph (0,88 mph)
Travel Speed (High) - 40,0 kph (25,2 mph)

NH TM 130 Power Take-Off

Rear PTO - Standard
Rear PTO speeds - 540/540E/1000 rpm
Engine speeds - 1969/1526/2120 rpm
PTO clutch type - Wet clutch Multiplate
PTO Engagement - Electro Hydraulic, proportional control
Groundspeed PTO - Optional
Front PTO - Optional
Front PTO speed - 1000 rpm

New Holland TM130 Hydraulics and Lift Capacity

Hydraulic system type (Std) - CCLS (Closed centre load sensing)
Hydraulic flow - 112,0 lpm (29,6 gpm)
Steering flow - 62,0 lpm (16,8 gpm)
Total oil flow (Hydraulic and steering) - 174,0 lpm (47,0 gpm)
CCLS hydraulic pressure - 200 bar
Hydraulic system type (Opt) - Open centre
Hydraulic flow (lpm) - 53 lpm (14,3 gpm)
Steering flow (lpm) - 52 lpm (14,1 gpm)
Total oil flow (Hydraulic and steering) - 106 lpm (28,6 gpm)
Open centre hydraulic pressure - 180 bar
Max. number rear valves - 4
Rear linkage capacity at 61 cm behind ball ends, through full lift range - 4415 kg
Max lifting capacity at ball ends with arms horizontal - 6770 kg
Front linkage capacity at 61 cm in front of ball ends - 3270 kg

Mechanical

Drive Wheels - All Wheel Drive (4x4)
Front Axle (Standard) - 4WD
Front Axle (Optional) - Terraglide front axle with automatic damping
Front Axle (Optional) - SuperSteer front axle
Steering - Hydrostatic
Service brake - Hydraulic wet disc

New Holland TM 130 Wheels and Tires

Front tire - 14.9 R28
Rear tire - 18.4 R38
Front track width (Min-Max) - 155-227 cm
Rear track width (Min-Max) - 153-223 cm

NH TM130 Dimensions and Weights

Overall length (4WD) - 579 cm
Overall length (Terraglide front axle) - 585 cm
Overall length (SuperSteer front axle) - 595 cm
Maximum height (4WD) - 303 cm
Wheelbase (4WD) - 272 cm
Wheelbase (Terraglide front axle) - 278 cm
Wheelbase (SuperSteer front axle) - 288 cm
Ground clearance - 40 cm
Turning Angle (4WD/Terraglide) - 55 degrees
Turning Angle (SuperSteer) - 65 degrees
Total Weight - 5250 kg
Maximum ballasted weight - 8500 kg

• see other models
  

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________