________________________________________________________________________________

New Holland TM150 Technical Data

NH TM-150 Engine Specifications

Engine Model - Ford 675-WV
Engine Type - 4 stroke direct injection diesel
Number of Cylinders - 6
Displacement, cu in (L) - 456 (7,486)
Engine Bore, in (mm) - 4,4 (111,8)
Engine Stroke, in (mm) - 5,0 (127,0)
Aspiration - Turbocharged
Maximum Engine Power, hp (kW) - 149,1 (111,0)
Rated Engine Speed, rpm - 2200
Maximum Torque, Nm (ft-lbs) - 649 (480,3)
Torque Speed, rpm - 1400
Compression - 17.5:1
Firing Order - 1-5-3-6-2-4
Fuel Injection to combustion chamber - Direct injection
Fuel Tank Capacity, gal (L) - 85,2 (321,0)
Oil Capacity, qts (L) - 20,0 (18,9)
Coolant Capacity, qts (L) - 26,9 (25,5)
Electrical System Rating, Volts - 12
Charging System - Alternator
Alternator Rating, Amps - 120

New Holland TM150 Power Take-Off

PTO Operational Type - Independent
PTO Horsepower, hp (kW) - 120,0 (89,5)
PTO Speeds (Std), rpm - 540/1000
PTO Speeds (Opt), rpm - 540/540E/1000
PTO / Engine Speeds, rpm - 540/1970, 540E/1546, 1000/2120

NH TM150 Transmission

Transmission (Standard) - 18F/6R Range Command
Transmission Type - Power shift
Number of Forward Speeds - 18
Number of Reverse Speeds - 6
Clutch - Electro-hydraulic wet disc
Maximum Forward Speed, mph (kph) - 25,3 (40,7)
Maximum Reverse Speed, mph (kph) - 7,5 (12,1)
Transmission (Optional) - 24F/12R Dual Command
Transmission Type - Two-speed power shift
Number of Forward Speeds - 24
Number of Reverse Speeds - 12
Maximum Forward Speed, mph (kph) - 23,7 (38,1)
Maximum Reverse Speed, mph (kph) - 18,1 (29,1)

New Holland TM-150 Wheels and Tires

Drive Wheels - 2WD/4WD
Steering Configuration - Front Steer
Steering System - Power
Front Tire Size - 16.9 R28
Rear Tire Size - 20.8 R38

Axles and Brakes

Front Axle (Std) - FWD
Front Axle (Opt) - SuperSteer / TerraGlide
Rear Axle - Flange
Rear Axle Bar (Length), in (mm) - 98 (2489)
Service Brake - Hydraulic wet disc

NH TM-150 Hydraulic System

Hydraulic System Type - Closed center load sensing
Implement Pump Flow, gpm (Lpm) - 28,0 (106,0)
Steering Pump Flow, gpm (Lpm) - 16,4 (62,1)
Hydraulic Pressure, Bar (psi) - 190 (2750)
Hydraulic Capacity, gal (L) - 26,5 (100,3)
Number of Standard Remote Valves - 4 Rear / 4 Mid

3-Point Hitch

3-Point Hitch Category - 2
Draft Sensing or Lift Control - Electronic lower-link draft sensing
Standard Lift Capacity 24-in behind pin, lb (kg) - 7208 (3269)
Standard Lift Capacity at lift pin, lb (kg) - 11700 (5300)

New Holland TM150 Dimensions and Weight

Wheelbase (2WD), in (mm) - 108,1 (2740)
Wheelbase (4WD), in (mm) - 107,2 (2720)
Wheelbase (SuperSteer), in (mm) - 113,4 (2880)
Wheelbase (Terraglide), in (mm) - 109,6 (2780)
Length (2WD), in (mm) - 180,5 (4580)
Length (4WD), in (mm) - 185,7 (4710)
Length (SuperSteer), in (mm) - 188,1 (4770)
Length (Terraglide), in (mm) - 191,9 (4870)
Height, in (mm) - 117.8 (2990)
Overall Width, in (mm) - 79,2 (2010)
Ground Clearance, in (mm) - 16,2 (410)
Front Tread (2WD), in (mm) - 60,8 to 86,1 (1540 to 2180)
Front Tread (4WD), in (mm) - 61,1 to 89,3 (1550 to 2260)
Rear Tread, in (mm) - 60,9 to 100,5 (1540 to 2550)
Weight (2WD), lb (kg) - 10480 (4755)
Weight (4WD), lb (kg) - 11575 (5250)

• see other models
  

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________