________________________________________________________________________________
New Holland TM 190 Tractor Technical Information
New Holland TM 190 Engine Specs
Engine Make - New Holland 675TA
Engine Type - 6 cylinder, vertical with turbocharger and air to air
intercooler
Displacement, cu in (litres) - 458 (7,6)
Cylinders - Six
Bore, in (mm) - 4,4 (111,8)
Stroke, in (mm) - 5,0 (127,0)
Aspiration - Turbocharged with intercooler
Engine horsepower, hp (kw) - 194 (142)
Rated speed, rpm - 2200
Engine horsepower with engine power management, hp (kw) - 229 (168)
Maximum engine horsepower with engine power management, hp (kw) - 240
(176)
Maximum torque, Nm - 864
Rated torque speed, rpm - 1400
Maximum torque with engine power management, Nm - 961
Rated torque speed with engine power management, rpm - 1600
Torque rise, % - 40
Compression ratio - 17.0 to 1
Air cleaner - Two paper elements and aspirator
Oil filter - One full flow cartridge
Fuel filter - One paper element
Cooling - medium temperature control thermostat and variable speed fan
Fuel capacity, gal (litres) - 105,4 (399,0)
Oil capacity, qts (litres) - 20,0 (19,1)
Coolant capacity, qts (litres) - 27,7 (26,2)
Electrical system - 12V
Starting system - 12 Volt
Charging system - Alternator
Charging Amps - 120
Battery Number - One
Battery cold-cranking, Amps - 1300
New Holland TM190 Transmission
Transmission (Standard) - 18F/6R (28F/12R with creeper)
Transmission Type - Power Command Full PowerShift with auto change
Forward Gears - 18 (28)
Reverse Gears - 6 (12)
Speed Range, kph (mph) - 1,94-40,0 (1,21-25,1)
Speed Range with Creeper, kph (mph) - 0,29-40,0 (0,18-25,2)
Transmission (Optional) - 19F/6R
Transmission Type - Power Command Economy Full Powershift
Forward Gears - 19
Reverse Gears - 6
Speed Range, kph (mph) - 1,94-40,0 (1,21-25,1)
NH TM 190 Power Take-Off
Rear PTO - Standard
Rear PTO speeds, rpm - 540/540E/1000
Engine speeds, rpm - 1969/1568/2178
PTO clutch type - Wet clutch Multiplate
PTO Engagement - Electro Hydraulic, proportional control
Front PTO - Optional
Front PTO speed, rpm - 1000
New Holland TM190 Hydraulics and Hitch
Hydraulic system type - Closed centre load sensing
Hydraulic system flow, l/m (gpm) - 120,0 (32,17)
Steering system flow, l/m (gpm) - 65,0 (17,4)
Total oil flow, l/m (gpm) - 185,0 (49,6)
Number of control valves (mech/electro) - 4/5
Joystick control and mid mount valves where specified - 2
Hydraulic pressure, bar (MPa) - 210 (21)
Hitch type - Rear
Rear hitch category - 2/3N
Control - Electronic lower-link draft control
Rear linkage capacity at 61 cm behind ball ends, through full lift
range, lbs (kg) - 15810 (7187)
Max lifting capacity at ball ends with arms horizontal, lbs (kg) - 19020
(8647)
Front linkage capacity at 61 cm in front of ball ends, lbs (kg) - 7198
(3270)
Mechanical
Drive Wheels - All Wheel Drive (4x4)
Front Axle (Std) - 4WD
Front Axle (Opt) - Terraglide front axle with automatic damping
Front Axle (Opt) - SuperSteer front axle
Steering - Hydrostatic
Service brake - Differential hydraulic wet disc
New Holland TM 190 Wheels and Tires
Front tires - 14.9-R28
Rear tires - 18.4-R38
Front track width (minimum), in (cm) - 61,7 (155,0)
Front track width (maximum), in (cm) - 90,1 (227,0)
Rear track width (minimum), in (cm) - 60,7 (152,5)
Rear track width (maximum), in (cm) - 96,7 (244,0)
NH TM 190 Dimensions and Weight
Overall length (4WD), in (cm) - 235,5 (593,5)
Overall length (Terraglide front axle), in (cm) - 237,9 (599,5)
Overall length (SuperSteer front axle), in (cm) - 241,7 (609,0)
Maximum height (4WD), in (cm) - 127,4 (321,0)
Wheelbase (4WD), in (cm) - 111,8 (282,0)
Wheelbase (Terraglide front axle), in (cm) - 114,2 (288,0)
Wheelbase (SuperSteer front axle), in (cm) - 118,1 (297,5)
Ground clearance, in (cm) - 15,9 (400,0)
Turning Angle (4WD/Terraglide), deg - 55
Turning Angle (SuperSteer), deg - 65
Total Weight (Cabine 4WD), lbs (kg) - 14522 (6600)
Maximum ballasted weight (Cabine 4WD), lbs (kg) - 26410 (12000)
________________________________________________________________________________
________________________________________________________________________________________
NH TRACTORS SPECIFICATIONS | ||||
T2220 | T2420 | T4.115 | T4.80 | T4050 |
T5.110 | T5060 | T6.140 | T6050 | T7.185 |
T7.270 | T7050 | T8.350 | TD4040 | TD5050 |
TL90 | TS110 | TS6030 | TT75 | TV6070 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
NH TRACTORS TROUBLESHOOTING | ||||
6640 | G240 | L95 | M135 | T3040 |
T4.110 | T5.105 | T5070 | T6.180 | T6030 |
T7.270 | T7040 | TC29D | TC35 | TD5.85 |
TL100 | TS6.140 | TV140 | TM155 | TN65 |
________________________________________________________________________________________
FORD TRACTORS SPECIFICATIONS | ||||
TL100 | TS6.140 | TV140 | TM155 | TN65 |
640 | 850 | 950 | 1100 | 1210 |
1320 | 1520 | 1620 | 1710 | 1900 |
1910 | 2000 | 2810 | 3000 | 3600 |
3910 | 3930 | 4000 | 4600 | 4610 |
4630 | 5000 | 5030 | 5600 | 5610 |
5640 | 6600 | 6610 | 6640 | 7630 |
7740 | 7840 | 8240 | 8340 | 8770 |
TW-15 | TW-20 | TW-25 | TW-30 | TW-35 |