________________________________________________________________________________

Oliver 1450 Technical Specs

Oliver 1450 Engine

Engine Model ...................... Fiat
Engine Type ...................... Four-cylinder water-cooled diesel
Number of Cylinders ...................... 4, in-line
Displacement, cu in (L) ...................... 268 (4.39)
Engine Bore, in (mm) ...................... 4.25 (108.0)
Engine Stroke, in (mm) ...................... 4.75 (121.0)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 62.0 (46.0)
Rated Engine Speed, rpm ...................... 1900
Compression Ratio ...................... 15.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Injection pump
Fuel Injection to Combustion Chamber ...................... Direct
Governor Type ...................... Centrifugal, variable speed
Air Cleaner ...................... Oil bath
Fuel Tank Capacity, gal (L) ...................... 21.0 (79.5)
Oil Capacity, qts (L) ...................... 9.0 (8.5)
Coolant Capacity, qts (L) ...................... 20.0 (18.8)
Electrical System Rating, Volts ...................... 12

Oliver 1450 Power Take Off

PTO Operational Type ...................... Live
PTO Horsepower, hp (kW) ...................... 55.0 (41.0)
PTO Clutch ...................... Dry disc
PTO Speed, rpm ...................... 540

Transmission Configuration

Transmission Type ...................... Sliding gear
Gearbox Type ...................... 7F/2R
Number of Forward Gears ...................... 7
Number of Reverse Gears ...................... 2
Clutch Type ...................... Dry disc
Oil Capacity, qts (L) ...................... 23.0 (21.7)
Maximum Forward Speed, mph (kph) ...................... 14.1 (22.7)
Maximum Reverse Speed, mph (kph) ...................... 6.1 (9.8)

Transmission Type ...................... Ampli-couple
Gearbox Type ...................... 14F/4R
Number of Forward Gears ...................... 14
Number of Reverse Gears ...................... 4
Clutch Type ...................... Dry disc
Oil Capacity, qts (L) ...................... 23.0 (21.7)
Maximum Forward Speed, mph (kph) ...................... 14.1 (22.7)
Maximum Reverse Speed, mph (kph) ...................... 6.1 (9.8)

Wheels and Tires

Drive Wheels ...................... 2WD/4WD
Steering Configuration ...................... Front steer
Steering System ...................... Manual/Power
Brakes Type ...................... Mechanical band
Front Tire Size (2WD) ...................... 6.50x18
Rear Tire Size (2WD) ...................... 14.9x30
Front Tire Size (4WD) ...................... 9.50x24
Rear Tire Size (4WD) ...................... 18.4x26

Hydraulic System

Hydraulic System Type ...................... Closed Center
Implement Pump Flow, gpm (Lpm) ...................... 7.0 (26.5)
Hydraulic Fluid Capacity, gal (L) ...................... 5.7 (21.7)
3-Point Hitch Category ...................... 2
Standard Lift Capacity at lift pin, lb (kg) ...................... 4400 (2000)

Dimensions and Weight

Wheelbase, in (mm) ...................... 85.4 (2160)
Length (2WD), in (mm) ...................... 135.9 (3450)
Length (4WD), in (mm) ...................... 137.8 (3500)
Height, in (mm) ...................... 66.5 (1680)
Overall Width, in (mm) ...................... 77 (1950)
Ground Clearance, in (mm) ...................... 18.3 (460)
Weight (2WD), lb (kg) ...................... 6000 (2720)
Weight (4WD), lb (kg) ...................... 6965 (3160)

Oliver 1450 Attachments

Front End Loader

Loader Model ...................... Oliver 1410
Maximum Lift Height at Pivot Pin, in (mm) ...................... 111 (2810)
Clearance with Bucket Dumped, in (mm) ...................... 84 (2130)
Reach at Maximum Lift Height, in (mm) ...................... 40.5 (1020)
Reach with Bucket on Ground Level, in (mm) ...................... 80 (2030)
Maximum Dump Angle, degrees ...................... 64
Lift Capacity to Maximum Height at Pivot Pin, lb (kg) ...................... 2000 (908)
Breakout Force at Pivot Pin, lb (kg) ...................... 3200 (1450)
Bucket Width (Std), in (mm) ...................... 48 (1215)
Bucket Width (Opt), in (mm) ...................... 68 (1720)