________________________________________________________________________________

John Deere 1026R Specs

Engine Specifications

Engine Model - Yanmar 3TNV76
Number of Cylinders - 3
Displacement, cu in (L) - 68.1 (1.116)
Engine Bore, in (mm) - 2.99 (76)
Engine Stroke, in (mm) - 3.23 (82)
Block Design, Replaceable Liners - Cast-in-block
Advertised Engine Power, Rated, hp (kW) - 25.2 (18.5)
Maximum Engine Power, hp (kW) - Same as Advertised
Rated Engine Speed, rpm - 3200
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 5.6 (21.2)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Aspiration, Turbocharged or Naturally Aspirated - Naturally aspirated
Fuel System Description - In-Line Pump System
Fuel System Control, Electronic or Mechanical - Mechanical
Fuel Injection to combustion chamber, Direct or Indirect - Indirect
Emission Level, US EPA Tier - Tier 4 Interim
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - No
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - No
Diesel Particulate Filter (DPF) - No
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 40

JD 1026R PTO

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 18 (13.4)
PTO Speeds, rpm - 540 Rear; 2100 Mid
PTO operational Type (Independent; Live; Continuous) - Independent

Transmission

Manufacturer's Description - Hydrostatic, 2 range
Transmission Type - Hydrostatic
Number of Forward / Reverse Speeds - Infinite, 2 ranges
Maximum Speed Forward, mph (kph) - 9.1 (14.6)
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Yes

John Deere 1026R Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase, 2WD, in (mm) - No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 57.1 (1450)
Front Tire Size, 2WD - No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track - 18x8.5-10, 4PR, R4
Rear Tire Size or Track Width - 26x12-12, 4PR, R4

JD 1026R Axles and Brakes

Final Drive Location and Description - Spur gear
Rear Axle Output End, Flange or Bar - Flange
Rear Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet disk

John Deere 1026R Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 3.5 (13.2)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 2

3-Point Hitch Features

3-Point Hitch Category - Limited Category 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Position Control
Draft Link Ends Telescopic - No
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 681 (309)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Standard Lift Capacity at lift pin, lb (kg) - np
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Fixed hitch plate

JD 1026R Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) - No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 102.6 (2605)
Height to Top of Cab, in (mm) - No Cab
Height to Top of ROPS raised, in (mm) - 77.5 (1968)
Overall Width, with standard wheels or tracks, in (mm) - 47.3 (1202)
Weight, 2WD w/ROPS, lb (kg) - No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) - 1,444 (655)
Weight, 2WD w/Cab, lb (kg) - No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - No Cab
Weight, Total allowable, w/maximum ballast, lb (kg) - np