________________________________________________________________________________

John Deere 6150RH Specs

John Deere 6150RH Engine Specifications

Engine Make - John Deere
Engine Model - PowerTech PVX, 6068HL490
Number of Cylinders - 6
Displacement, cu in (L) - 414 (6.8)
Engine Bore, in (mm) - 4.19 (106.5)
Engine Stroke, in (mm) - 5.0 (127)
Advertised Engine Power, Rated, hp (kW) - 150 (110)
Maximum Engine Power, hp (kW) - 170 (125)
Rated Engine Speed, rpm - 2100
Power Boost, hp (kW) - 20 (15)
Fuel Tank capacity, gal (L) - 80.5 (305)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Block Design, Replaceable Liners - Wet liners
Aspiration, Turbocharged or Naturally Aspirated - VGT Turbocharged, air-to-air aftercooled
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 4 Interim
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - Cooled EGR
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - DPF standard
Exhaust Pipe, Vertical stack or Horizontal - Vertical stack
Cooling System Fan Drive Type - Viscous
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120 std; 200 opt

Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 120 (90)
PTO Speeds, rpm - 540 / 1000 std; 540E or 1000E opt.
PTO operational Type (Independent; Live; Continuous) - Independent

JD 6150RH Transmission

Manufacturer's Description - 16F/16R PowrQuad Plus
Transmission Type - Partially synchronized
Number of Forward / Reverse Speeds - 16F / 16R
Maximum Speed Forward, mph (kph) - 19 (30)
Creeper Range Available - Optional
Shuttle (Forward-Reverse) Available - Left hand lever std

John Deere 6150RH Mechanical

Drive Wheels - 4WD
Steering Configuration - Front Steer
Final Drive Location and Description - Outboard drop-center gearbox
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet disk

JD 6150RH Hydraulic System

Hydraulic System Type - Closed-center, Pressure-Flow Compensated (PFC)
Main Hydraulic Pump Type - Axial piston
Implement Pump Flow, gpm (Lpm) - 30 (114)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 3 std; 4 opt.

John Deere 6150RH Hitch

3-Point Hitch Category - Category 3 / 3N
Optional Hitch Category - No option
Draft Sensing or Lift Control - Electronic lower link
Draft Link Ends Telescopic - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 9,193 (4170)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Standard Lift Capacity at lift pin, lb (kg) - 17,813 (8080)
Drawbar Description - Category 2, Swinging, adjustable

Dimensions and Weight

Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 108.9 (2765)
Front Tire Size orTrack Width, MFD/4WD or Track - 320/90 R46, R2
Rear Tire Size or Track Width - 18.4 R38, R2
Height to Top of Cab, in (mm) - 124 (3150)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 14,500 (6577)