________________________________________________________________________________

John Deere 4200 Specs

JD 4200 Engine Specifications

Engine Model Number - Yanmar 3TNE78A
Engine Type - Diesel
Cylinders - 3
Gross Horsepower - 19.6 kW (26.3 hp)
PTO Horsepower (SyncShift) - 16.0 kW (21.5 hp)
PTO Horsepower (Hydro) - 14.9 kW (20.0 hp)
Rated Engine Speed - 2700 rpm
Operating Range - 950-2810 rpm
Engine Torque @ Rated Speed - 63.2 Nm (46.6 lb-ft)
Compression Ratio - 18:1
Lubrication - Pressurized
Cooling System - Water Pump
Oil Filter - Single Element
Air Cleaner - Dry Type with Safety Element
Starting Aid - Air Heater
Electrical System Type - 12 Volt
Battery Size - 500 Cold Cranking Amps at -18C (0F)
Alternator - 40 Amp
High Capacity Alternator - 55 Amp
Starter Size - 1.2 kW (1.6 hp)
Fuel Filter - Replaceable Element
Fuel - Diesel
Fuel Pump - In-Line with Electric Shutoff
Fuel Delivery - Direct Injection, Self Bleeding

John Deere 4200 Transmission

Transmission Type - SyncShift (2WD and 4WD)
Gears (Forward/Revers) - 9/3
Main Clutch Disk Type (SyncShift) - One Mult-Disk Wet Clutch
Main Clutch Disk Diameter (SyncShift) - 124 mm (4.88 in.)
Transmission Type - Hydrostatic (2WD and 4WD)
Gears - Infinite Forward, Infinite Reverse

Power Take-Off

Type - Independent
Clutch Type - Wet Disk
Brake Type - Wet Disk
Speed (Mid PTO rpm @ Rated Engine Speed) - 2100 rpm
Speed (Rear PTO rpm @ Rated Engine Speed) - 540 rpm

JD 4200 Mechanical

MFWD - Optional
Capability for MFWD - All Ranges
Rear Final Drive Type - Spur Gear
Differential Lock - Mechanical
Brakes Type - Wet Disk
Steering - Power, Cylinder-Assisted
Front Axle Operating Capacity - 720-1275 kg (1588-2811 lb)
Rear Axle Operating Capacity - 2000 kg (4409 lb)
Drawbar Maximum Vertical Load - 255 kg (562 lb)

Hydraulic System and Hitch

Type of System - Open Center
Power Steering - Standard
Pump Type - Dual Gear
Working Pressure - 14650 kPa (2125 psi)
Pump Capacity (Main) @ Rated Speed - 27.6 L/min (7.3 gpm)
Pump Capacity (Power Steering) @ Rated Speed - 18.9 L/min (5.0 gpm)
Total Flow of Pumps @ Rated Speed - 46.5 L/min (12.3 gpm)
Hitch Type - Category 1
Lift Capacity-61 cm (24 in.) Behind Link Arms - 771 kg (1700 lb)

Tire Sizes

Front Tires - 7.00-12 4PR R1 TI (MFWD)
Front Tires - 23x8.50-12 4PR R4 TI (MFWD)
Front Tires - 25x8.50-14 4PR R3 TI (MFWD)
Front Tires - 25x8.5-14 4PR R3 TI (2WD)
Rear Tires - 12.4-16 6PR R1 TI
Rear Tires - 13.6-16 4PR R3 TI
Rear Tires - 14.00-17.5 6PR R4 TI

JD 4200 Dimensions

Wheelbase - 1.65m (65.0 in.)
Overall Length with 3-Point Hitch - 2.97m (117 in.)
Overall Width (Minimum), 2WD - 1.3m (53 in.)
Overall Width (Minimum), MFWD - 1.43m (56.3 in.)
Overall Width (Maximum), 2WD - 1.5m (58.4 in.)
Overall Width (Maximum), MFWD - 1.73m (68.2 in.)
Inside Width (Minimum), 2WD - 68.8cm (27.1 in.)
Inside Width (Minimum), MFWD - 74.4cm (29.2 in.)
Inside Width (Maximum), 2WD - 72.5cm (28.5 in.)
Inside Width (Maximum), MFWD - 1.04m (41.2 in.)
Height From Ground To Top of Hood, 2WD - 1.2m (50.4 in.)
Height From Ground To Top of Hood, MFWD - 1.28m (50.4 in.)
Height From Ground To Top of Standard ROPS, 2WD - 2.05m (81.0 in.)
Height From Ground To Top of Folding ROPS, MFWD - 2.21m (87.0 in.)
Height From Ground To Top of Folding ROPS - 2.2m (87.0 in.)
Ground Clearance, Rear Axle - 26.7cm (10.5 in.)
Weight (2WD) - 1077 kg (2375 lb)
Weight (MFWD) - 1213 kg (2675 lb)

John Deere 4200 Attachments

420 Loader

Height (to pin) - 86.5 inches (219 cm)
Clearance, dumped bucket - 63 inches (160 cm)
Dump reach - 30.3 inches (76 cm)
Dump angle - 43
Reach at ground - 57.8 inches (146 cm)
Rollback angle - 24
Breakout force (at 80 cm) - 2141 lbs (971 kg)
Lift to full height (at 80 cm) - 1003 lbs (454 kg)
Raise time to height - 3.3 s
Bucket dump time - 1.8 s
Lowering time - 2.5 s
Rollback time - 2.4 s

47 Backhoe

Weight - 1047 lbs (474 kg)
2-Foot flat digging depth - 90 inches (228 cm)
Reach from pivot - 114 inches (289 cm)
Loading height - 70 inches (177 cm)
Bucket Rotation - 180
Swing Arc - 180
Bucket force - 2840 lbs (1288 kg)
Dipperstick force - 2005 lbs (909 kg)