________________________________________________________________________________

John Deere 4710 Specs

John Deere 4710 Engine Specifications

Manufacturer - Yanmar
Model Number - 4TNE88
Type - Diesel
Gross Horsepower - 34.5 kW (46.3 hp)
Rated Engine Speed - 2600 rpm
Operating Range 1000 - 2810 rpm
Engine Torque @ Rated Speed - 117 Nm (86 lb-ft)
Maximum Torque @ 1700 rpm - 146 Nm (108 lb-ft)
Displacement - 2.2 L (133 cu in.)
Cylinders - 4
Bore and Stroke - 88 x 90 mm (3.5 x 3.5 in.)
Compression Ratio - 18:1
Lubrication - Pressurized
Cooling System - Water Pump
Oil Filter - Single Element
Air Cleaner - Dry Type with Safety Element
Starting Aid - Air Heater
Electrical System Type - 12 Volt
Battery Size - 690 Cold Cranking Amps at -18C (0F)
Alternator - 40 Amp
Starter Size - 2.0 kW (2.7 hp)
Fuel Filter - Replaceable Element
Fuel - Diesel
Fuel Pump - In-Line with Electric Shutoff
Fuel Delivery - Direct Injection, Self Bleeding
Fuel Tank - 47.5L (12.5 gal)
Cooling System - 6.4L (1.7 gal.)
Crankcase w/ Filter - 4.8L (5.1 qt.)

JD 4710 Power Take-Off

Type - Independent
Clutch Type - Wet Disk
Brake Type - Wet Disk
Speed (Mid PTO rpm @ Rated Engine Speed) - 2100 rpm
Speed (Rear PTO rpm @ Rated Engine Speed) - 540 rpm
PTO Horsepower (SyncShift / PowrReverser) - 29.8 kW (40 hp)
PTO Horsepower (Hydrostatic) - 28.7 kW (38.5 hp)

John Deere 4710 Transmission

Optional Transmission - PowrReverser 12x12 PowrReverser (4WD)
Optional Transmission - Hydrostatic (4WD)
Main Clutch Disk Type - Multiple Stage Wet
Main Clutch Disk Diameter (PowrReverser) - 24 cm (9.45 in.)
Number Of Speeds (PowrReverser) - 12 Forward, 12 Reverse
Number Of Speeds (Hydrostatic) - Infinite Forward, Infinite Reverse

Mechanical

Chassis - Mechanical Front Wheel Drive
Rear Final Drive Type - Planetary Gear
Differential Lock - Mechanical
Brakes Type - Wet Disk
Steering - Power, Cylinder-Assisted
Front Axle Capacity - 5.0L (1.3 gal.)
Front Axle Operating Capacity - 450-500 kg (992-1102 lb)
Rear Axle Operating Capacity - 900-1000 kg (1984-2205 lb)

John Deere 4710 Hydraulic System

Type of System - Open Center
Power Steering - Standard
Implement and Steering -Pump Type - Gear Pump
Working Pressure - 17237 kPa (2500 psi)
Pump Capacity (Main) @ Rated Speed - 40.0 L/min (10.6 gpm)
Pump Capacity (Power Steering) @ Rated Speed - 20.0 L/min (5.3 gpm)
Total Flow of Pumps @ Rated Speed - 60.0 L/min (15.9 gpm)
Hydraulic System Capacity - 35.0L (9.2 gal.)

3-Point Hitch

Type - Category 1
Lift Capacity (24-in. behind link arms) - 1135 kg (2500 lb)
Dimension Lower Link Ball Socket ID - 22 mm (7/8 in.)
Dimension Upper Link Pin Hole ID - 19 mm (3/4 in.)
Dimension Normal Width @ Lower Hitch Pins - 68.6 cm (27 in.)
Dimension Normal Height From Center Pin to Hitch Pin - 45.7 cm (18 in.)
Drawbar Tongue Capacity - 259 kg (570 lb)

JD 4710 Wheels and Tires

Front (MFWD) - 27x12LL-15 6PR GOLF GA
Front (MFWD) - 7.00-16 6PR R1 TI
Front (2WD) - 6.50-16 6PR F2 TI
Rear - 13.6-24 6PR R1 TI
Rear - 16.9-24 6PR R1 TI
Inflation Pressures 27x12LL-15 6PR GOLF GA - 221 kPa (32 psi)
Inflation Pressures 7.00-16 6PR R1 TI - 248 kPa (36 psi)
Inflation Pressures 6.50-16 6PR F2 TI - 331 kPa (48 psi)
Inflation Pressures 13.6-24 6PR R1 TI - 152 kPa (22 psi)
Inflation Pressures 16.9-24 6PR R1 TI - 124 kPa (18 psi)

John Deere 4710 Dimensions

Wheelbase - 1,8 m (71.5 in.)
Overall Length w/ 3-Point Hitch - 3,4 m (135 in.)
Overall Width - 2,4 m (92.6 in.)
Inside Width - 1,5 m (60 in.)
Height From Ground To Top of Hood - 1,3 m (51 in.)
Height From Ground To Top of Standard ROPS - 2,3 m (91.6 in.)
Height From Ground To Top of Folding ROPS - 2,4 m (97.6 in.)
Weight - 1564kg (3450 lb)