________________________________________________________________________________

John Deere 7410 Specs

JD 7410 Engine Specifications

Engine Model - PowerTech 6068
Engine Type - Diesel
Cylinders - In-line 6
Engine Power (Factory Observed) - 78 kW (105 hp)
Rated Speed - 2100 rpm
Aspiration - Turbocharged
Lubrication - Full Pressure-Flow Filtration with Bypass
Displacement - 6.8 L (414 in.3)
Bore - 106.5 mm (4.19 in.)
Stroke - 127 mm (5.00 in.)
Compression Ratio - 17.0:1
Slow Idle Speed - 800-900 rpm
Operating Speed - 1680-2100 rpm
Fuel System Type - Direct Injection
Injection Pump Type - Rotary
Injection Pump Timing - TDC
Air Cleaner - Dry Type Dual Element
Cooling System Type - 69 kPa (0.7 bar) (10 psi) with Centrifugal Pump
Fan - Viscous Drive
Thermostats - Two Heavy-Duty
Electrical System Type - 12 Volt, Negative Ground
Alternator - Open Station 90 amp / Cab 120 amp
Batteries - Two 12 Volt in Parallel

John Deere 7410 Power Take Off

PTO Type - Fully Independent
Speed 540 rpm - 2080 Engine rpm
Speed 1000 rpm - 2093 Engine rpm
PTO Size - 35 mm (1-3/8 in.)
Clutch - Multiple Wet-Disk Hydraulically Operated

Transmission

Standart Transmission - SyncroPlus
Type - Planetary Gears, Mechanically Activated, Wet Disk Clutches and Brakes
Gear Selections - 12 Forward, 4 Reverse
Shifting - Mechanical, Fully Synchronized Shift On-th-Go and Under Load in Each Range
Optional Transmission - PowrQuad
Type - Planetary Gears, Hydraulically Activated, Wet Disk Clutches and Brakes
Gear Selections - 16 or 20 Forward, 16 or 20 Reverse
Shifting - Mechanical-Hydraulic, Full Power Shift On-the-Go, and Under Load in Each Range

JD 7410 Mechanical

Chassis - 4x2 2WD / 4x4 MFWD 4WD (optional)
Steering - hydrostatic power
Brakes Type - Hydraulically Operated Wet Disk
Cab - ComfortGard cab standard

Hydraulics and Hitch

Type - Closed-Center, Pressure/Flow Compensated
Pump - 9-Piston, Variable Displacement Axial
Pump Displacement (Standard) - 25 cm3 (1.5 in.3)
Pump Displacement (Optional) - 40 cm3 (2.4 in.3)
Valves - 2 to 4
Pump flow - 26 gpm (98.4 lpm) / 38 gpm (143.8 lpm)
Total flow - 16 gpm (60.6 lpm)
Maximum Pressure - 20 000 kPa (200 bar) (2900 psi)
Steering System - Hydrostatic
Available Flow at One SCV (Standard/Optional) - 1.6 L/s (26 gpm) / 2.4 L/s (38 gpm)
Hitch Type - 2 or 3N/2
Hitch Lift Capacity Two-Wheel Drive - 3360 kg (7400 lb)
Hitch Lift Capacity MFWD - 3809 kg (8390 lb)

John Deere 7410 Capacities

Fuel Tank (Standard/Optional) - 190L (50 gal) / 152L (40 gal)
Cooling System - 19L (20 qt)
Crankcase with Filter - 19L (20 qt)
SyncroPlus Transmission, Differential and Hydraulic System - 57L (15 gal)
SyncroPlus Transmission with MFWD, Differential and Hydraulic System - 64L (17 gal)
PowrQuad Transmission, Differential, and Hydraulics - 57L (15 gal)
PowrQuad Transmission with MFWD, Differential and Hydraulics - 64L (17 gal)
PowrQuad Transmission with Creeper, Differential, and Hydraulics - 61L (16 gal)
PowrQuad Transmission with MFWD and Creeper, Differential and Hydraulics - 68L (18 gal)
Mechanical Front Wheel Drive Axle Housing - 14.4L (15.2 qt)
Mechanical Front Wheel Drive Wheel Hubs (Standard) - 1.9L (2 qt)
Mechanical Front Wheel Drive Wheel Hubs (High Crop) - 3.8L (4 qt)
Rear Hi-Crop Axle Housings - 3.8L (4 qt)

JD 7410 Dimensions and Weight

Wheelbase Two-Wheel Drive - 2.85 m (112.1 in.)
Wheelbase MFWD - 2.63 m (103.3 in.)
Length (Less Hitch and Drawbar) - 4.40 m (173.0 in.)
Width (Axle Length) Rack and Pinion - 2.40 m (96.0 in.)
Width (Axle Length) Flanged - 2.00 m (79.0 in.)
Width (Axle Length) Flanged (Hi-Clearance) - 1.94 m (76.5 in.)
Height Top of ComfortGard - 2.83 m (111.6 in.)
Height Top of Steering Wheel (Two-Wheel Drive Open Station) - 2216 m (87.2 in.)
Turning Radius (2WD/MFWD) - 4.51 m (177.6 in.) / 4.75 m (187.2 in.)
Ground Clearance (2WD/MFWD) - 0.76 m (30.0 in.) / 0.58 m (22.9 in.)
Shipping Weight 2WD with Cab, SyncroPlus, and 18.4-38 Rear and 11.00-16 Front Tires - 5212 kg (11491 lb)
Shipping Weight MFWD with Cab, SyncroPlus, and 18.4-38 Rear and 13.6R28 Front Tires - 5599 kg (12343 lb)