________________________________________________________________________________

John Deere 7930 Specs

JD 7930 Engine Specifications

Engine Power, Rated, hp (kW) - 220 (164)
Maximum Engine Power, hp (kW) - 243 (181)
Engine Speed, rpm - 2100
Power Boost, hp (kW) - 23 (17.2)
Fuel Tank, gal (L) - 103.5 (392)
Engine Make - John Deere
Engine Model - 6.8L PowerTech Plus
Cylinders - 6
Displacement, cu in (L) - 414 (6.8)
Engine Bore, in (mm) - 4.193 (106.5)
Engine Stroke, in (mm) - 5.0 (127)
Block Design, Replaceable Liners - Wet sleeve
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged air to air aftercooled
Fuel System Description - High Pressure Common Rail
Fuel System Control - Electronic
Fuel Injection to combustion chamber - Direct
Emission Level - Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - Cooled EGR
Diesel Oxidation Catalyst (DOC) - No
Diesel Particulate Filter (DPF) - No
Exhaust Pipe - Vertical
Cooling System Fan Drive Type - Electronic speed control
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 200

Power take off

PTO Horsepower, hp (kW) - 180 (134)
PTO Speeds, rpm - 540 / 1000
PTO operational Type - Independent

John Deere 7930 Transmission

Description - PowrQuad Plus
Transmission Type - Electro-Hydraulic
Forward / Reverse Speeds - 16F / 16R
Maximum Speed Forward, mph (kph) - 18.18 (29.25)
Creeper Range - No
Shuttle (Forward-Reverse) - Std

Optional Transmission

Description - AutoQuad Plus
Transmission Type - Electro - Hydraulic
Forward / Reverse Speeds - 20F / 20R

JD 7930 Wheels and Tires

Drive Wheels - 4WD
Tractor Steering Configuration - Front Steer
Wheelbase, 2WD, in (mm) - No 2WD
Wheelbase, 4WD, in (mm) - 112.6 (2860)
Front Tire Size, 2WD - No 2WD
Front Tire Size, 4WD - 420/90R30 (R1)
Rear Tire Size - 480/80R46 R1

Axles and Brakes

Final Drive - Planetary / Inboard
Axle Output End - Bar w/ rack and pinion
Axle Bar Diameter, in (mm) - 3.94 (100)
Suspended Front Axle - Optional
Brake Type - Wet disc

John Deere 7930 Hydraulic System

Hydraulic System Type - Closed center, pressure & flow comp.
Main Hydraulic Pump Type - Axial piston
Standard Pump Flow, gpm (Lpm) - 32 (121)
Optional Pump Flow, gpm (Lpm) - 45 (174)
Standard Remote Valves - 2

3-Point Hitch

3-Point Hitch Category - Category 3 / 3N
Optional Hitch Category - No option
Draft Sensing or Lift Control - Electronic
Draft Link Ends Adjustable - Std
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 10,050 (4559)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 14,000 (6350)
Drawbar Description - Adjustable

JD 7930 Dimensions and Weight

Weight (shipping) - 17731 lbs (8042 kg)
Wheelbase - 112.6 inches (286 cm)
Length - 225 inches (571 cm)
Width - 96 inches (243 cm)
Height (cab) - 122.4 inches (310 cm)
Clearance (front axle) - 27.4 inches (69 cm)
Clearance (rear axle) - 32.5 inches (82 cm)
Clearance (drawbar) - 18.25 inches (46 cm)
Rear axle - Bar 3.94 by 110.3 inches (100x2801 mm)