________________________________________________________________________________

John Deere 2038R Specs

VIEW 2038R ATTACHMENTS

JD 2038R Engine Specifications

Engine Model - Yanmar 3TNV86CT-NJT2
Engine Type - Diesel
Gross Horsepower - 27.4 kW (36.8 hp)
Manufacturer’s Estimated PTO Horsepower - 22.7 kW (30.4 hp)
Low Idle Speed - 950 rpm
Rated Engine Speed - 2500 rpm
High Idle - 2650 rpm
Operating Range - 950-2650 rpm
Engine Torque @ Rated Speed - 105 Nm (77.4 lb-ft)
Maximum Torque @ 1625 rpm - 127 Nm (93.7 lb-ft)
Displacement - 1.57 L
Cylinders - 3
Cooling System - Liquid
Oil Filter - Single Element
Air Cleaner - Dual Element
Starting Aid - Glow Plug
Battery Voltage - 12V
Battery Cold Cranking Amps @ -18C (0F) - 500
Alternator Capacity - 85 Amp

John Deere 2038R Power Take-off

Rear PTO - Independent
Clutch - Wet disc
Rear RPM - 540 (1.375)
Mid PTO - Independent
Mid RPM - 2100
Front PTO (Opt.) - Independent
Front RPM - 2100
PTO Power - 30 hp (22.4 kW)

John Deere 2038R Drivetrain

Transmission Type - Hydrostatic
Speeds - Infinite / Two-speed ranges
Mechanical Front Wheel Drive - Standard
Engage MFWD - four-wheel braking
Final Drive - Spur Gear
Rear Axle Weight Capacity (Continuous) - 1800 kg (3968 lb)
Front Axle Weight Capacity (Continuous) - 880 kg (1764 lb)
Forward and Reverse Speed (Low Range) - 0-9.2 km/h (0-5.7 mph)
Forward and Reverse Speed (High Range) - 0-24.7 km/h (0-15.4 mph)
Differential lock - Mechanical Rear
Steering - Power Steering
Steering Wheel - Tilt Control
Brakes - Wet disc

John Deere 2038R Hydraulics and Hitch

Hydraulic System Type - Open center
Pump Type - Tandem Gear
Hydrostatic Pump Type - PV Axial Piston
System Relief Pressure - 17237 kPa (2500 psi)
Implement Pump Flow @ Rated Speed - 20.2 L/min (5.3 gpm)
Power Steering Pump Flow @ Rated Speed - 15 L/min (4 gpm)
Total Pump Flow - 35.2 L/min (9.3 gpm)
hydraulic Control - SCV
3-Point Hitch Type - Category 1
3-Point Hitch Lift Capacity at ends behind hitch ball - 946 kg (2086 lb)
3-Point Hitch Lift Capacity 61 cm (24 in.) behind hitch ball - 675 kg (1488 lb)

JD 2038R Tire Sizes

Front Tires - 23x8.50-14 6PR-R4
Front Tires - 23x8.50-14 6PR-R3
Front Tires - 200/60R15-R3
Front Tires - 7.00-12 6PR-R1
Rear Tires - 14-17.5 6PR-R4
Rear Tires - 14-17.5 6PR-R3
Rear Tires - 300/70R20-R3
Rear Tires - 12.4-16 6PR-R1

Capacities

Fuel Tank - 32 L (8.5 gal)
Cooling System (Open Operator Station) - 5.2 L (5.5 qt)
Cooling System (Cab) - 5.7 L (6.0 qt)
Crankcase with Filter - 4.3 L (4.5 qt)
Transmission and Hydraulic System - 23.5 L (24.8 qt)
Front Axle - 3.8 L (4 qt)

John Deere H130 Loader

Lift capacity at pivot pin (max. height), kg (lb) - 410 (902)
Maximum lift height at pivot pin, mm (in) - 1993 (78.5)
Reach at max. height, mm (in) - 750 (29.5)
Breakout force at pivot pin, kg (lb) - 1016 (2239)
Dump Angle, deg. - 38
Rollback Angle, deg. - 25
Loader Raising Time, sec. - 3.19
Loader Lowering Time, sec. - 1.95
Bucket Dump Time, sec. (regen) - 3.19
Bucket Rollback Time, sec. - 1.95

JD 2038R Dimensions

Wheelbase - 1723 mm (67.8 in.)
Overall Length from front bumper to 3-point hitch - 2990 mm (117.5 in.)
Overall Width - 1400 mm (55.1 in.)
Height from Ground to top of hood - 1280 mm (50.4 in.)
Height from Ground to top of ROPS - 2344 mm (92.3 in.)
Front Axle Ground Clearance - 248.5 mm (9.8 in.)
Turning Radius 2WD with brakes - 2.15 m (84.6 in.)
Turning Radius 2WD without brakes - 2.5 m (98.4 in.)
Base Tractor Weight - 1105 kg (2436 lb)
Maximum vertical load - 500 daN
Towable Mass (Unbraked) - 1500 kg
Towable Mass (Independently braked) - 2400 kg
Towable Mass (Inertia braked) - 2500 kg
Combination mass tractor plus trailer - 4900 kg