________________________________________________________________________________

John Deere E100 Specs

JD E100 Engine Specifications

Engine Model - Briggs and Stratton 31R977
Engine Configuration - Vertical
Engine Power HP (gross) - 16.0
Displacement - 500 cc (30.5 cu. in.)
Bore (in) - 2.68
Stroke (in) - 2.60
Compression Ratio - 8.2:1
Spark Plug Gap - 0.76 mm (0.030 in)
Spark Plug Torque - 20 Nm (15 lb-ft)
Cylinders - Single
Lubrication System - Full Pressure Lubrication with Spin-On Oil Filter
Oil Capacity (oz) - 48
Oil Filter - Standard
Air Filter - Cartridge
Ignition System - Magnetron Electronic Ignition
Crankcase, with Oil Filter - 1.4 L (1.5 qt)
Fuel Tank - 9 L (2.4 gal)
Fuel delivery - Pulse pump and carburetor
Fuel gauge - Mechanical, viewable from seat
Fuel tank location - Rear
Fuel fill opening - Center, 1.75 in. (4.45 cm)
Engine starter - Bendix type

John Deere E100 Transmission

Transmission Type - Automatic CVT
Transaxle Model - General Transmission RT400
Reduction Ratio - 53.1:1
Maximum Tractor Weight - 500 lbs
Maximum Wheel Size - 20 inches
Continuous Torque Rating - 200 Nm
RT400 Variator Range - 5
Cone Break - Integrated, automatically applied when in neutral
Axle Shaft Size - 19.05 mm (0.075 inches)
Speed adjustment - Stepless continuous
Parking brake - Integrated automatic
Forward Speed - 0-8.9 km/h (0-5.5 mph)
Reverse Speed - 0-4.8 km/h (0-3.0 mph)
Cruise control - Not equipped
Oil cooler - Fins and fan on transaxle

Electrical System

Charging System - Regulated Circuit
Charging System Capacity - 9 Amp
Battery Voltage - 12 Volts
Battery Type - BCI Group U1

JD E100 Tires

Size (Front) - 15x6.00-6
Size (Rear) - 20x8.0-8
Tire Pressure (Front) - 97 kPa (14 psi)
Tire Pressure (Rear) - 69 kPa (10 psi)

Dimensions

Height - 1080 mm (42.5 in)
Length (Overall) - 1750 mm (68.75 in)
Width (Mower Deck Chute Down) - 1380 mm (54.4 in)
Operating Weight - 189 kg (415 lb)

John Deere E100 Attachments

42 Inch Side Discharge Mower Deck

Cutting width - Edge mower deck, 42 in. (107 cm)
Construction - Stamped steel deck shell
Mower deck material - Steel, 13 gauge
Wash port - Yes
Drive system - Manual power take-off (PTO)
Mower wheels - Two
Mower wheel adjustment - One bolt
Level adjustment - Easy-level deck
Mower Attach Type - Slide under tractor
Front draft arms - One spring clip
Rear draft arms - Two spring clips
Wheels rotate - Not equipped
Drive system - Single belt

42 Inch Mower Deck

Blades Rotary - 2
Blade Nut Torque (w/5/8 in. Nut) - 88 Nm (65 lb-ft)
Cutting Height (Approximately) - 25-102 mm (1-4 in)
Cutting Width - 1070 mm (42 in)

48 Inch Mower Deck

Blades Rotary - 3
Blade Nut Torque (w/5/8 in. Nut) - 88 Nm (65 lb-ft)
Cutting Height (Approximately) - 25-102 mm (1-4 in)
Cutting Width - 1220 mm (48 in)

54 Inch Mower Deck

Blades Rotary - 3
Blade Nut Torque (w/5/8 in. Nut) - 88 Nm (65 lb-ft)
Cutting Height (Approximately) - 25-102 mm (1-4 in)
Cutting Width - 1370 mm (54 in)

JOHN DEERE TRACTORS ATTACHMENTS
420	430	455	790	990
X300	X320	X330	X350	X475
X485	X500	X540	X570	X590
X700	X720	X738	X758	1023E
2025R	2210	2520	3025E	3032E
3038E	3038R	3039R	3046R	3203
3320	3520	4052R	4066R	4100
4105	4115	4200	4310	4320
4400	4410	4520	4600	4720

JD TRACTORS TROUBLESHOOTING
2640	3040	3310	3650	4100
5050D	5090R	5410	6105R	7200R
E130	L111	LA110	LT155	X300R