________________________________________________________________________________

John Deere 4510 Specs

John Deere 4510 Engine Specifications

Engine Model - Yanmar 4TNE84
Type - Vertical, 4-cycle water-cooled diesel engine
Gross Horsepower - 28.6 kW (38.4 hp)
Rated Engine Speed - 2600 rpm
Operating Range 1000 - 2810 rpm
Engine Torque @ Rated Speed - 100 Nm (74 lb-ft)
Maximum Torque @ 1700 rpm - 125 Nm (92 lb-ft)
Combustion system - Direct injection system
No. of cylinders - 4
Bore x Stroke, mm - 84 x 90
Displacement, L - 1.995
Firing order - 1-3-2-1
Direction of rotation - Counterclockwise
Power take off - Flywheel
Compression ratio - 18.0
Lubrication - Pressurized
Cooling System - Water Pump
Fuel Tank - 47.5 L (12.5 gal)
Cooling System - 6.1 L (1.6 gal.)
Oil Filter - Single Element
Air Cleaner - Dry Type with Safety Element
Starting Aid - Air Heater
Electrical System Type - 12 Volt
Battery Size - 690 Cold Cranking Amps at -18C (0F)
Alternator - 40 Amp
Starter Size - 2.0 kW (2.7 hp)
Fuel Filter - Replaceable Element
Fuel - Diesel
Fuel Pump - In-Line with Electric Shutoff
Fuel Delivery - Direct Injection, Self Bleeding
Crankcase w/ Filter - 4.8 L (5.1 qt.)
Dimensions, L x W x H - 683 x 498.5 x 618
Dry weight, kg - 184

JD 4510 Power Take-Off

PTO Type - Independent
Clutch Type - Wet Disk
Brake Type - Wet Disk
Speed (Mid PTO rpm @ Rated Engine Speed) - 2100 rpm
Speed (Rear PTO rpm @ Rated Engine Speed) - 540 rpm
Estimated PTO Horsepower - 24.6 kW (33 hp)

John Deere 4510 Transmission

Standart Transmission - SyncShift 9x3 SyncShift (2WD)
Optional Transmission - PowrReverser 12x12 PowrReverser (4WD)
Clutch Disk Type (SyncShift Transmission) - Single Stage Dry
Clutch Disk Type (PowrReverser Transmission) - Multiple Stage Wet
Number Of Speeds (SyncShift) - 9 Forward, 3 Reverse
Number Of Speeds (PowrReverser) - 12 Forward, 12 Reverse
Transmission Capacity - 36.9 L (9.7 gal.)

Mechanical

Chassis - Mechanical Front Wheel Drive
Rear Final Drive Type - Planetary Gear
Differential Lock - Mechanical
Brakes Type - Wet Disk
Steering - Power, Cylinder-Assisted
Front Axle (MFWD) Capacity - 5.0 L (1.3 gal.)
Front Axle Operating Capacity - 450-500 kg (992-1102 lb)
Rear Axle Operating Capacity - 900-1000 kg (1984-2205 lb)

John Deere 4510 Hydraulic System

Type of System - Open Center
Power Steering - Standard
Implement and Steering Pump Type - Gear Pump
Working Pressure - 17237 kPa (2500 psi)
Pump Capacity (Main) @ Rated Speed - 40.0 L/min (10.6 gpm)
Pump Capacity (Power Steering) @ Rated Speed - 20.0 L/min (5.3 gpm)
Total Flow of Pumps @ Rated Speed - 60.0 L/min (15.9 gpm)
Hydraulic System Capacity - 36.9 L (9.7 gal.)

3-Point Hitch

Type - Category 1
Lift Capacity (24-in. behind link arms) - 1135 kg (2500 lb)
Dimension Lower Link Ball Socket ID - 22 mm (7/8 in.)
Dimension Upper Link Pin Hole ID - 19 mm (3/4 in.)
Dimension Normal Width @ Lower Hitch Pins - 68.6 cm (27 in.)
Dimension Normal Height From Center Pin to Hitch Pin - 45.7 cm (18 in.)
Drawbar Tongue Capacity - 259 kg (570 lb)

JD 4510 Wheels and Tires

Front (MFWD) - 8.00-16 6PR R1 TI
Front (MFWD) - 27x10.5-15 4PR R3 TI
Front (2WD) - 6.00-16 6PR F2 TI
Front (2WD) - 27x10.5-15 4PR R3 TI
Rear - 44x18.00-20 4PR R3 TI
Rear - 17.5L-24 8PR R4 TI
Inflation Pressures 8.00-16 6PR R1 TI - 193 kPa (28 psi)
Inflation Pressures 27x10.5-15 4PR R3 - 207 kPa (30 psi)
Inflation Pressures 6.00-16 6PR F2 TI - 359 kPa (52 psi)
Inflation Pressures 44x18.00-20 4PR R3 TI - 138 kPa (20 psi)
Inflation Pressures 17.5L-24 8PR R4 TI - 179 kPa (26 psi)

John Deere 4510 Attachments

72" Mower deck

Type - Mid-mount John Deere
Blades - Three
Cutting width - 72 inches (182 cm)

460 Loader

Loader type - John Deere 460
Height (to pin) - 112 inches (284 cm)
Clearance, dumped bucket - 89 inches (226 cm)
Dump reach - 27 inches (68 cm)
Dump angle - 45
Reach at ground - 62 inches (157 cm)
Rollback angle - 30
Breakout force (at pin) - 3863 lbs (1752 kg)
Breakout force (at 500mm) - 2929 lbs (1328 kg)
Lift to full height (at pin) - 2330 lbs (1056 kg)
Lift to full height (at 500mm) - 1705 lbs (773 kg)
Raise time to height - 4,8s
Bucket dump time - 2,2s
Lowering time - 3,3s
Rollback time - 2,5s

Dimensions

Wheelbase - 1,8 m (71.5 in.)
Overall Length w/ 3-Point Hitch - 3,4 m (135 in.)
Overall Width - 2,3 m (91.1 in.)
Inside Width - 1,5 m (60 in.)
Height From Ground To Top of Hood - 1,3 m (51 in.)
Height From Ground To Top of Standard ROPS - 2,3 m (91.4 in.)
Height From Ground To Top of Folding ROPS - 2,5 m (97.4 in.)
Weight - 1564kg (3450 lb)