________________________________________________________________________________

John Deere 8310 Specs

JD 8310 Engine Specifications

Type - Diesel
Cylinders - In-line 6
ECE-R24 at Rated Speed - 173 kW (235 hp)
Rated Speed - 2200 rpm
Aspiration - Turbocharged and Air-to-Air Aftercooled
Lubrication - Full-Flow Filtration with Bypass
Displacement - 8.1 L (496 in3 )
Bore - 116 mm (4.56 in.)
Stroke - 128 mm (5.04 in.)
Intake Valve Clearance - 0.46 mm (0.018 in.)
Exhaust Valve Clearance - 0.71 mm (0.028 in.)
Compression Ratio - 15.8:1
Slow Idle - 800±10 rpm
Fast Idle - 2300±25 rpm
Governed Speed Range - 800-2400 rpm
Operating Speed Range - 1500-2200 rpm
Injection Pump Type - In-Line with Electronic Governor
Fuel Filter - Standard Clamp-On Final Filter with Optional Spin-On Primary Filter with Water Separator Bowl
Air Cleaner - Dry-Type with Secondary Element
Cooling System Type - 69 kPa (0.7 bar) (10 psi) with Centrifugal Pump
Fan - Viscous Drive
Thermostats - Two Heavy-Duty
Electrical System Type - 12 Volt
Alternator - Negative Ground 140 Amp
Batteries - Two 12 Volt
Cold Cranking Amps - 1850

John Deere 8310 Power Take Off

PTO Type - Fully Independent
Standard Size - 45 mm (1-3/4 in.) 1000 rpm
Optional Size - 45 mm (1-3/4 in.) 1000 rpm-35 mm (1-3/8 in.) 1000 rpm-35 mm (1-3/8 in.) 540 rpm Adapter
PTO Operating Speed 1000 rpm - 2200 rpm
PTO Operating Speed 540 rpm - 1975 rpm

JD 8310 Transmission

Model - Powershift Transmission
Transmission Type - Electronically Activated, Wet Disk Clutch
Gear Selections - 16 Forward and 5 Reverse
Clutch - Multiple Wet-Disk Hydraulically Activated
Brakes Type - Hydraulically Operated Wet Disk

Mechanical

Chassis - 4x2 2WD or 4x4 MFWD 4WD (optional)
Steering - Hydrostatic power Steering
Brakes Type - Hydraulically Operated Wet Disk

John Deere 8310 Hydraulics and Hitch

Type - Pressure/Flow Compensated
Tandem Pump (Steering-Brakes-Charge) - Gear Pump
Maximum Pressure - 20 000 kPa (200 bar) (2900 psi)
Rated Flow at Charge Pump - 108 L/min (28 gpm)
Rated Flow at Primary Pump - 78 L/min (21 gpm)
Secondary Pump (Hitch-SCVs) - Axial Piston Pump
Available Flow at SCVs - 132 L/min (33.5 gpm)
Available Flow at SCVs (Optional Pump) - 162 L/min (42.5 gpm)
Selective Control Valves (SCVs) - Electro-hydraulic
Hitch Lift Capacity per OECD Procedures (610 mm (24 in.) Behind Hitch Points Through Entire Lift Range) - 49.9 kN (14165 lb)
Rear Hitch Type - 3, 3N
Rear lift - 11700 lbs (5307 kg) / 15650 lbs (7098 kg)

JD 8310 Dimensions and Weight

Wheelbase - 2950 mm (116.1 in.)
Overall Length - 5246 mm (206.5 in.)
Width (axle length) - 2438 mm (96 in.)
Axle Diameter - 100 mm (3-15/16 in.)
Height Top of Cab - 3053 mm (120.2 in.)
Crop Clearance (Front Axle-MFWD) - 590 mm (23.2 in.)
Crop Clearance (Rear Axle Housing) - 802 mm (31.5 in.)
Drawbar Clearance - 442 mm (17.4 in.)
Turning Radius - 5.3 m (17.5 ft)
Weight (Average Shipping) - 8419 kg (18523 lb)

Maximum Permissible Vertical Static Load

Drawbar (Normal Position) - 1450 kg (3195 lb)
Drawbar (Fully Retracted) - 3000 kg (6600 lb)
Drawbar with Adjustable Height Wagon Hitch - 1800 kg (3965 lb)
Adjustable Height Wagon Hitch - 1800 kg (3965 lb)
Pickup Hitch (Hook) - 3000 kg (6600 lb)
Pickup Hitch (Drawbar) - 1000 kg (2200 lb)